
The AirTAC SAID32 Double Rod Cylinder SAID32BX155S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 155mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X155-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 155mm stroke. Because the piston rod extends from both end covers, the effective annulus area is identical in both directions, yielding an equal extend and retract force of 483 N at 0.7 MPa. A magnet is built in for position sensing.
This variant is configured with SUS304 stainless steel rods (code B) for superior corrosion resistance and uses PT tapered port threads. The rear rod protrusion allows you to mount a secondary cam or position flag, while the extruded aluminum barrel integrates sensor grooves on both sides for flexible CMSE or DMSE switch placement.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX155S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 155 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×155 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a transfer shuttle where the workpiece is pushed and pulled with identical 483 N force, ensuring consistent cycle timing without pressure compensation.
Guides a vertical lifting slide using both rod ends to resist torsional twist, maintaining precise alignment without external linear bearings.
Actuates a primary clamping tool on the front rod while using the rear rod protrusion to trigger a physical limit flag for secondary confirmation.
Select this 32mm bore double-rod cylinder when your mechanism requires equal force and speed in both travel directions, or needs dual-side guidance to prevent rotation. If your application demands less force, stepping down is not an option in this series, but stepping up to the 40mm bore provides 739 N at 0.5 MPa. Conversely, if you only need unidirectional push force and standard single-rod operation, the standard SAI series is more appropriate.
This SAID32X155-S configuration includes a magnet for sensors, PT ports, and SUS304 rods. It supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). Note that the adjustable air cushions only decelerate the piston near stroke end; they do not hold a load. If air pressure is lost, the cylinder will drift, requiring an external rod lock or a SAIL/BSAID variant for secure position holding. Because the stroke is 155mm, ensure adequate rear-rod clearance in your design.
Quick checklist
Because it is a double-rod cylinder, the push and pull forces are equal. It generates 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa in both extend and retract directions.
Yes, the SAID32X155-S is dimensionally interchangeable per ISO 15552 profile standards. It shares the same mounting footprint as other ISO 15552 double-rod cylinders, though you must account for the PT port threads and rear-rod clearance.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.