
The AirTAC SAID32 Double Rod Cylinder SAID32BX170 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 170mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X170 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 170mm stroke. Because the piston rod extends from both end covers, the annulus area is identical on both sides, yielding exactly 483N of force in both extend and retract directions at 0.5 MPa.
This variant uses a SUS304 stainless steel rod for superior corrosion resistance. The extruded aluminum barrel includes sensor grooves on both sides, allowing you to mount position switches independently on either end to track the twin rod extensions.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX170 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 170 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×170 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a transfer carriage where equal push and pull thrust of 483N ensures consistent acceleration and deceleration without momentum shifts.
Powers a vertical lift slide using the twin rods to maintain strict linear guidance and prevent mechanical binding under offset loads.
Actuates a primary gripper on the front while the rear rod extension triggers a secondary mechanical valve or limit flag.
Select this 32mm bore when an application requires 483N of symmetric force, or step up to the 40mm bore (528N at 0.5 MPa) if your load demands slightly higher thrust. A double-rod design is preferred over a single-rod SAI when you need dual-side guidance to prevent rotation, or require a rear rod extension to mount a secondary cam. Keep in mind a plain SAID does not hold position unpowered; for locking needs consider SAIL or BSAID.
This cylinder is dimensionally interchangeable per ISO 15552. It uses PT tapered port threads (G1/8) and supports mountings Basic, FA, LB, TC, FTC, TCM1, TCM2. Since the stroke is 170mm, ensure the unsupported load is guided externally to prevent rod-bearing bending.
Quick checklist
It provides 345N at 0.5 MPa, 483N at 0.7 MPa, and 621N at 0.9 MPa. Because it is a double-rod cylinder, these pull-side force figures are identical for both the extend and retract strokes.
Yes, the SAID32X170 is dimensionally interchangeable per ISO 15552. It shares standard mounting dimensions and uses the same footprint as other ISO 15552 profile cylinders, though it omits FB, CA, CB, and CR mountings.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.