
The AirTAC SAID32 Double Rod Cylinder SAID32BX170S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 170mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X170-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 170mm stroke. Because the piston rod exits both end covers, the effective annulus area is identical on extend and retract, yielding exactly 345 N of force in each direction at 0.5 MPa. A magnet is included for position sensing.
This variant uses SUS304 stainless steel rods (code B) for superior corrosion resistance and is fitted with PT tapered port threads. The rear rod extension allows you to mount a secondary cam, position flag, or second tool, while simultaneously providing dual-side guidance to prevent load rotation. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX170S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 170 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×170 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a transfer carriage where the 345 N extend and retract forces must be perfectly matched, preventing jerky movements during bidirectional indexing.
Lifts and lowers a delicate pick-and-place head using both rod ends to keep the assembly perfectly aligned without twisting under offset loads.
Actuates a small clamping jaw on the front while the rear SUS304 rod end drives a physical flag past a DMSE electronic sensor to confirm stroke completion.
Choose this 32mm bore when an application demands equal push and pull forces (345 N at 0.5 MPa) and inherent anti-rotation guidance that a single-rod SAI cannot provide. If your payload is lighter, stepping down is not an option as 32mm is the smallest SAID bore, but stepping up to a 40mm bore increases the bidirectional force to 528 N. For this 170mm stroke, side-load risks are moderate, but external guidance is recommended if the load is heavy or off-center.
This cylinder uses the reduced SAID mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting FB, CA, CB, and CR brackets. It is dimensionally interchangeable per ISO 15552. Note that the adjustable air cushions only decelerate the piston near stroke ends; they do not hold the load. If air pressure drops, the cylinder will drift, requiring an external rod lock or a SAIL/BSAID variant for secure position holding.
Quick checklist
Because it is a double-rod cylinder, the force is identical in both directions. It provides 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa for both extend and retract strokes.
Yes, it is dimensionally interchangeable with other ISO 15552 profile cylinders. It uses the SAID mounting subset (Basic, FA, LB, TC, FTC, TCM1, TCM2). The included magnet works with AirTAC CMSE reed and DMSE electronic sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.