
The AirTAC SAID32 Double Rod Cylinder SAID32BX175S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 175mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X175-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 175mm stroke. Because the piston rod extends from both end covers, the annulus area is identical on both sides, yielding perfectly symmetrical thrust. This design outputs 483 N of force in both extend and retract directions at 0.7 MPa.
Equipped with a magnetic piston (-S), this variant supports AirTAC CMSE reed and DMSE electronic solid-state sensors housed within the dual-side barrel grooves. It utilizes SUS304 stainless steel rods for superior corrosion resistance and features PT tapered port threading. The rear rod extension is ideal for mounting a secondary cam, position flag, or driving a second mechanism.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX175S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Ideal for pushing and pulling identical loads at matching speeds, leveraging the equal 483 N annulus force in both directions.
The twin SUS304 rods provide superior torsional rigidity, preventing the workpiece from rotating during transit.
Mounts a CMSE or DMSE sensor flag on the rear rod protrusion to trigger downstream operations without interfering with the primary work area.
Select this 32mm bore when an application demands equal push and pull forces, specifically 345 N at 0.5 MPa. If your mechanism requires less force, stepping down is not an option as 32mm is the smallest standard SAID size; however, stepping up to a 40mm bore increases the bidirectional force to 528 N at 0.5 MPa. Choose the SAID double-rod configuration over a single-rod SAI when you need dual-side guidance, anti-rotation stability, or rear-rod position sensing.
As a true ISO 15552 profile cylinder, it serves as a direct replacement for other ISO 15552 double-rod cylinders. It supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). Note that the adjustable air cushions only decelerate the piston near stroke end; this cylinder will drift and cannot hold a load if air pressure is lost. For position holding without live pressure, consider an external rod lock or the SAIL series.
Quick checklist
Because it is a double-rod cylinder, the effective area is the same on both sides. It provides equal push and pull forces: 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa.
Yes, it is dimensionally interchangeable per ISO 15552 standards. It shares the exact mounting interface and profile dimensions of other standard double-rod cylinders, though it uses PT tapered ports and a reduced mounting accessory set.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.