
The AirTAC SAID32 Double Rod Cylinder SAID32BX185 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 185mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X185 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 185mm stroke. Because the piston rod extends from both end covers, the effective annulus area is identical on both sides, yielding perfectly symmetrical thrust. This design generates about 483N of force in both extend and retract directions at 0.7 MPa.
Equipped with SUS304 stainless steel rods, this variant offers superior corrosion resistance for harsh or washdown environments. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of position switches. A rod protrudes from the rear cover, allowing engineers to mount a secondary cam, position flag, or drive a second mechanism simultaneously.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX185 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 185 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×185 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a transfer carriage where the 483N extend and retract forces at 0.7 MPa must be perfectly matched to prevent motor stutter on a pneumatic press.
Moves a light gripper slide along a 185mm path, using the twin SUS304 rods to keep the tooling parallel and prevent torsional twisting.
Actuates a primary clamping jaw on the front rod while the rear rod simultaneously trips a mechanical limit valve or sensor flag at the same stroke length.
Select this 32mm bore when an application requires equal push and pull forces, specifically 345N at 0.5 MPa. If your mechanism needs less force, stepping down is not an option as 32mm is the smallest SAID bore; stepping up to a 40mm bore increases the both-way output to 528N at 0.5 MPa. The double-rod architecture is chosen over a single-rod SAI when the load requires dual-side guidance to prevent rotation or when a rear rod is needed for external tracking.
As a true ISO 15552 profile cylinder, it provides a dimensionally interchangeable direct replacement for other ISO 15552 double-rod cylinders. It uses a PT tapered G1/8 port and supports mountings from the reduced SAID set: Basic, FA, LB, TC, FTC, TCM1, and TCM2. Note that the adjustable air cushions only decelerate the piston near stroke end; they do not hold the load. If position holding without live air pressure is required, consider an external rod lock or the BSAID clamp-lock series.
Quick checklist
Because it is a double-rod cylinder, the force is identical in both directions. It provides 345N at 0.5 MPa, 483N at 0.7 MPa, and 621N at 0.9 MPa for both extend and retract strokes.
Yes, the SAID32X185 is dimensionally interchangeable per ISO 15552 mounting dimensions. It serves as a direct replacement for other ISO 15552 profile double-rod cylinders, using the standard Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounting accessories.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.