
The AirTAC SAID32 Double Rod Cylinder SAID32BX190 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 190mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X190 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 190mm stroke. Because the piston rod extends from both end covers, the effective annulus area is identical on both sides, yielding exactly 483N of force in both extend and retract directions at 0.7 MPa. The rear rod end is perfect for mounting a position flag or driving a secondary mechanism.
This variant is configured with a SUS304 stainless steel rod for superior corrosion resistance and uses PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides, allowing you to mount CMSE reed or DMSE electronic switches exactly where needed without extra brackets.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX190 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 190 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×190 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a dual-station pick-and-place where equal 483N push and pull forces are required to shuttle components without speed variations.
Uses the twin-rod geometry to guide a vertical lifting slide, preventing piston rotation and ensuring precise linear movement.
Mounts a physical cam or sensor flag on the protruding rear rod to trigger external limit switches independently of the front tool.
Choose this 32mm bore when an application requires 483N of symmetric force both ways, or step down if less power is needed. Unlike a single-rod SAI cylinder, the SAID32X190 provides dual-side guidance to resist rotation and allows twin-station actuation. For applications needing position holding without live air pressure, note that this standard cylinder will drift; consider a SAIL lock or external pilot-operated check valve.
As a dimensionally interchangeable ISO 15552 component, it drops in seamlessly with existing mounting footprints using Basic, FA, LB, TC, FTC, TCM1, or TCM2 accessories (FB, CA, CB, and CR are omitted). Ensure your setup specifies PT ports and no internal magnet. Since the 190mm stroke is under 300mm, side-load stress on the rod bearing is moderate, but external guidance is still recommended for heavy lateral loads.
Quick checklist
Because it is a double-rod cylinder, the push and pull forces are identical. It delivers 345N at 0.5 MPa, 483N at 0.7 MPa, and 621N at 0.9 MPa in both directions.
Yes, it is dimensionally interchangeable per ISO 15552. It supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, but omits FB, CA, CB, and CR styles found on single-rod variants.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.