
The AirTAC SAID32 Double Rod Cylinder SAID32BX20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 20mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X20 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 20mm stroke. Because the piston rod exits both end covers, the annulus area is identical on extend and retract, yielding equal force and speed in both directions. This generates about 345 N of thrust and pull each way at 0.5 MPa.
Equipped with SUS304 stainless steel rods (material code B), this variant offers superior corrosion resistance over standard carbon steel. The G1/8 PT tapered ports ensure a tight pneumatic seal. While it lacks a standard magnet for position sensing, the extruded aluminum barrel retains sensor grooves on both sides for external mounting if needed later.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a lightweight transfer carriage where the 345 N output must remain identical whether pushing or pulling the payload.
Twin rods guide a short-stroke clamping jaw, preventing rotational twist during the 20mm clamping motion.
Uses the protruding rear rod end to trip an external mechanical limit switch while the front rod performs the primary work.
Select this 32mm bore when an application demands symmetric force in a compact footprint, stepping down from a 40mm bore (which provides 528 N at 0.5 MPa) to save space, or up from smaller non-ISO units. The twin-rod design is chosen over a single-rod SAI when you need to mount a cam or secondary flag on the rear rod extension, or require dual-side guidance to prevent the load from rotating. Keep in mind a plain SAID does not hold position unpowered; for locking needs, consider SAIL or BSAID variants. For ISO 15552 interchangeability, match the 32mm bore, 20mm stroke, PT port thread, and your required mounting accessory (Basic, FA, LB, TC, FTC, TCM1, or TCM2).
Quick checklist
Because it is a double-rod cylinder, the force is equal in both directions. It provides 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa for both extend and retract strokes.
Yes. The SAID32X20 is dimensionally interchangeable per ISO 15552. You can use it as a direct replacement for other ISO 15552 double-rod cylinders with a 32mm bore and 20mm stroke, provided you match the PT port and mounting interface.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.