
The AirTAC SAID32 Double Rod Cylinder SAID32BX200 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 200mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X200 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 200mm stroke. Because the piston rod exits both end covers, the annulus area is identical on both sides, yielding exactly 483N of force at 0.7 MPa in both extend and retract directions.
This configuration uses a SUS304 stainless steel rod for superior corrosion resistance and includes PT tapered port threads. The rear rod extension is ideal for mounting a position flag or driving a secondary mechanism, while the twin rods provide excellent anti-rotation guidance.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX200 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Push and pull identical loads at matching speeds using the equal annulus area on both sides of the piston.
Keep workpieces guided and prevent twisting during vertical or horizontal movements with twin-rod stability.
Mount a cam or position flag on the rear rod extension to trigger external limit switches independently.
Choose this 32mm bore when an application requires symmetric force and speed, stepping down from a 40mm bore (739N at 0.5 MPa) if 345N each way is sufficient. A double-rod design is preferred over a single-rod SAI when you need dual-side guidance to prevent rotation or require a rear rod for external limit sensing. Note that the adjustable air cushions only decelerate the piston near stroke end; this cylinder will drift if air pressure is lost, so a SAIL or BSAID lock is needed for position holding.
For this 200mm stroke, the 12mm rod and M10x1.25 thread handle moderate side loads, but an external guide is recommended for heavy off-center loads. It is dimensionally interchangeable with other ISO 15552 double-rod cylinders, utilizing a PT G1/8 port and mounting accessories from the SAID set (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Quick checklist
It provides 345N at 0.5 MPa, 483N at 0.7 MPa, and 621N at 0.9 MPa. Because it is a double-rod cylinder, this pull-side force figure is identical for both extension and retraction.
Yes, the SAID32X200 shares standard ISO 15552 mounting dimensions, making it a direct replacement for other double-rod profile cylinders. It uses a G1/8 port and supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.