
The AirTAC SAID32 Double Rod Cylinder SAID32BX200S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 200mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X200-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32 mm bore and 200 mm stroke. Because the piston rod extends from both end covers, the effective annulus area is identical on extension and retraction. This yields perfectly symmetric force and speed, providing 483 N of thrust and pull at 0.7 MPa.
This specific configuration includes a SUS304 stainless steel rod (material code B) for superior corrosion resistance and a piston magnet (-S) for position sensing. The extruded aluminum barrel integrates sensor grooves on both sides, allowing you to mount CMSE reed or DMSE electronic switches along either side. A PT tapered port thread secures the G1/8 air connection.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX200S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a workpiece from one side while an identical counter-force operates on the opposite end, ensuring balanced 483 N motion without speed discrepancies.
Twin SUS304 rods guide the payload securely, preventing torsional twist during horizontal handling and precision assembly tasks.
Mounts a cam or target on the rear rod extension to trigger DMSE electronic sensors, providing precise end-of-stroke confirmation for automated equipment.
Choose this 32 mm bore when an application demands exactly 483 N of force in both directions, such as moving a symmetrical load. If your project requires less force, dropping down is not an option in the SAID series, but stepping up to a 40 mm bore increases the bidirectional output to 739 N at 0.7 MPa. Select a double-rod design over a single-rod SAI when you need to mount a cam or position flag on the rear rod, or when dual-side guidance is required to prevent the load from twisting.
For a direct replacement, this cylinder is dimensionally interchangeable per ISO 15552. Specify the 32 mm bore, 200 mm stroke, PT G1/8 port, and the -S magnet. Since the stroke is 200 mm, the unsupported rod length is moderate, but always ensure the rear rod has adequate clearance. Note that the adjustable air cushions only decelerate the piston near stroke ends; they do not hold the load if air pressure is lost. Use an external rod lock or SAIL cylinder if static holding is required.
Quick checklist
Because it is a double-rod cylinder, the push and pull forces are equal. It generates 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa in both directions.
Yes, it is dimensionally interchangeable with ISO 15552 profile cylinders. It supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, but omits FB, CA, CB, and CR styles.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.