
The AirTAC SAID32 Double Rod Cylinder SAID32BX220S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 220mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X220-S is a double-acting, double-rod ISO 15552 profile cylinder. Because a rod exits both ends, the annulus area is identical on extend and retract, yielding exactly 483N of force each way at 0.7 MPa. This symmetric output is ideal for mechanisms requiring consistent push and pull dynamics.
This specific configuration features SUS304 stainless steel rods for superior corrosion resistance and includes a magnet for position sensing. The rear rod protrusion allows you to mount a cam or limit flag opposite the primary workload, while the extruded aluminum barrel provides sensor grooves on both sides for flexible switch placement.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX220S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 220 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×220 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a transfer carriage with identical 483N push and pull forces, ensuring consistent acceleration and deceleration without asymmetric speed drift.
The twin SUS304 rods guide the load against rotation, maintaining precise linear tracking for a 220mm stroke machining or clamping slide.
Mounts a physical cam or DMSE sensor target on the rear rod end to trigger secondary operations without interfering with the primary front tooling.
Choose this 32mm bore when an application demands equal 483N bi-directional force at 0.7 MPa alongside anti-rotation guidance. If your mechanism needs less force, dropping down is not an option in this size, but stepping up to a 40mm bore increases the both-way output to 739N. A double-rod design is preferred over a single-rod SAI when you need to drive twin stations simultaneously or require rear-rod position feedback.
This cylinder uses a PT tapered port thread and includes a magnet for CMSE reed or DMSE electronic sensors. Mounting options are limited to the SAID set: Basic, FA, LB, TC, FTC, TCM1, and TCM2. Note that air cushions only decelerate the piston near stroke end; this cylinder will drift and cannot hold a load if air pressure is lost. For secure holding, consider an external rod lock.
Quick checklist
Because it is a double-rod cylinder, the effective piston area is the same in both directions. It delivers 345N at 0.5 MPa, 483N at 0.7 MPa, and 621N at 0.9 MPa on both extend and retract strokes.
Yes, the SAID32X220-S is dimensionally interchangeable per ISO 15552. It shares the same mounting footprint and body dimensions as other standard profile cylinders, though you must ensure your system accommodates the rear rod protrusion.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.