
The AirTAC SAID32 Double Rod Cylinder SAID32BX225 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 225mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X225 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 225mm stroke. Because the piston rod exits both end covers, the annulus area is identical on both sides, yielding exactly 483N of force in both extend and retract directions at 0.7 MPa.
This configuration includes a SUS304 stainless steel rod for superior corrosion resistance and utilizes PT tapered port threads. The rear rod extension is ideal for mounting a position flag or driving a secondary mechanism, while the extruded aluminum barrel integrates sensor grooves on both sides.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX225 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 225 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a workpiece from one side while the matching 483N retract force ensures perfectly balanced, equal-speed return cycles without pressure spikes.
The twin-rod architecture prevents piston rotation during transit, providing precise linear guidance for delicate pick-and-place tooling.
Utilize the protruding rear rod to trigger external mechanical limit switches or pilot valves independently of the primary front-load tooling.
Select this 32mm bore when an application requires symmetric force and speed, stepping up from smaller actuators or down from a 40mm bore (which provides 528N at 0.5 MPa) if your force budget is tighter. A twin-rod design is chosen over a single-rod SAI when you need dual-side guidance, anti-rotation stability, or rear-rod cam actuation. Since the stroke is 225mm, the unsupported length is moderate, but external guidance helps prevent rod-bearing bending under heavy lateral loads.
As a standard ISO 15552 profile cylinder, it serves as a direct replacement for other double-rod cylinders with matching dimensions. Specify the 32mm bore, 225mm stroke, PT port threads, and your required mounting accessory from the SAID set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Note that this model lacks a magnet; if position sensing is needed, choose the -S option for CMSE or DMSE switches. Remember that standard air cushions only decelerate the piston near stroke end and do not hold the load if air pressure is lost.
Quick checklist
Because it is a double-rod cylinder, the output force is identical in both directions. It provides 345N at 0.5 MPa, 483N at 0.7 MPa, and 621N at 0.9 MPa for both extend and retract strokes.
Yes, the SAID32X225 is dimensionally interchangeable per ISO 15552 mounting interface dimensions. It uses the same profile footprint as other standard double-rod cylinders, though it omits FB, CA, CB, and CR mountings.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.