
The AirTAC SAID32 Double Rod Cylinder SAID32BX230 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 230mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X230 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 230mm stroke. Because the piston rod occupies both sides, the effective annulus area is identical in each direction, yielding perfectly symmetric thrust. This design outputs 483N of force both extending and retracting at 0.7 MPa, eliminating speed and force mismatches.
Equipped with SUS304 stainless steel rods (code B), this variant provides superior corrosion resistance for harsh environments. A rod protrudes from both end covers, allowing you to mount the primary workpiece on the front and a position flag or cam on the rear. It features adjustable air cushions at both ends and operates at speeds from 30-800 mm/s.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX230 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 230 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×230 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a transfer carriage where the 483N extending and retracting forces must match exactly to prevent jerky movements during directional changes.
Utilizes the twin-rod geometry to guide a vertical slide, preventing torsional twist without requiring external linear bearings.
Mounts the work tool on the front rod while using the rear rod extension to trigger a solid-state DMSE sensor for mid-stroke confirmation.
Select this 32mm bore when an application demands equal push and pull forces, specifically 345N each way at 0.5 MPa. If your mechanism requires less force, stepping down is not an option as 32mm is the smallest SAID bore; however, if you need significantly more thrust, consider the 40mm bore which provides 528N both ways. The double-rod design is chosen over a single-rod SAI when dual-side guidance, anti-rotation stability, or rear-rod sensing is required.
This cylinder uses PT tapered port threads and a G1/8 port. It supports mounting accessories Basic, FA, LB, TC, FTC, TCM1, and TCM2, but omits FB, CA, CB, and CR. Because the stroke is 230mm, the extended rod length necessitates external side-load guidance to prevent rod-bearing bending. Note that the adjustable cushions decelerate the piston near stroke ends but do not hold the load; if position holding without air pressure is needed, use a SAIL lock cylinder or external rod lock.
Quick checklist
The SAID32X230 provides equal force in both directions due to its double-rod design. It outputs 345N at 0.5 MPa, 483N at 0.7 MPa, and 621N at 0.9 MPa for both extending and retracting.
Yes, the SAID32X230 is dimensionally interchangeable per ISO 15552. It shares the same mounting footprint and profile barrel dimensions as comparable ISO 15552 double-rod cylinders, allowing for seamless integration.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.