
The AirTAC SAID32 Double Rod Cylinder SAID32BX240 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 240mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X240 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 240mm stroke. Because the piston rod exits both end covers, the annulus area is identical on extend and retract, yielding equal force and speed in both directions. This generates 345 N each way at 0.5 MPa and 483 N at 0.7 MPa.
Equipped with SUS304 stainless steel rods (code B), this variant provides excellent corrosion resistance for harsh environments. The rear rod end can drive a secondary mechanism or mount a position flag, while the extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX240 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 240 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×240 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a workpiece from one end while the opposing rear rod moves an identical load, ensuring perfectly balanced 345 N force at 0.5 MPa in both directions without speed drift.
The twin-rod architecture prevents piston rotation during travel, making it ideal for precision vertical slides and guided lifting arms where angular stability is critical.
Uses the front rod to push a part into a fixture while the rear rod simultaneously trips a mechanical limit valve or operates a secondary clamping mechanism.
Select this 32mm bore when an application requires balanced 483 N force both ways at 0.7 MPa, stepping down from a 40mm bore (528 N at 0.5 MPa) to save space, or up from smaller non-ISO cylinders. A double-rod design is chosen over a single-rod SAI when you need dual-side guidance to prevent rotation or require actuation at both ends. Note that this cylinder does not hold position when air is lost; for locking needs, consider SAIL or BSAID variants.
For a direct replacement, match the 32mm bore, 240mm stroke, PT G1/8 port threads, and the desired mounting accessory from the SAID set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Since the stroke is 240mm, the 12mm rod and M10x1.25 thread may experience bending under heavy lateral loads; use an external guide to support the workpiece.
Quick checklist
Because it is a double-rod cylinder, the force is equal in both directions. It provides 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa for both extend and retract strokes.
Yes, the SAID32X240 is dimensionally interchangeable per ISO 15552. You can use it as a direct replacement for other ISO 15552 double-rod cylinders, matching the 32mm bore, 240mm stroke, and G1/8 PT port.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.