
The AirTAC SAID32 Double Rod Cylinder SAID32BX25 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 25mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X25 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 25mm stroke. Because the piston rod exits both end covers, the effective annulus area is identical in both directions, yielding equal push and pull forces of 345N at 0.5MPa. This through-rod architecture provides superior anti-rotation guidance compared to a single-rod SAI.
This specific configuration uses SUS304 stainless steel (code B) for both rod ends, offering excellent corrosion resistance for harsh environments. It features PT tapered port threads and lacks a piston magnet. The extruded aluminum barrel includes sensor grooves on both sides, allowing you to mount CMSE reed or DMSE electronic switches on either end to track the rear rod extension.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX25 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a workpiece from one end while the opposing rear rod pushes an identical load, utilizing the exact 345N force in both extend and retract directions.
The dual SUS304 rods guide the payload securely against twisting forces, maintaining precise alignment without needing external linear bearings.
Mounts a mechanical cam or sensor flag on the rear rod end to trigger external limit switches, leveraging the through-rod design for compact feedback.
Choose this 32mm bore when an application demands symmetric force and speed in both directions, delivering 345N each way at 0.5MPa. If your mechanism requires less force, stepping down is not an option in the SAID range, but stepping up to a 40mm bore provides 528N both ways. The twin-rod design is ideal for driving twin-station loads or mounting a rear cam for position feedback. Remember that the adjustable air cushions only decelerate the piston near stroke end; this cylinder will drift if air pressure is lost, so a SAIL or BSAID lock variant is needed for fail-safe holding.
As a dimensionally interchangeable ISO 15552 profile cylinder, it serves as a direct replacement for other standard double-rod units. It accepts Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, but omits FB, CA, CB, and CR accessories. With a short 25mm stroke, side-load stress on the rod bearing is minimal, but external guidance is always recommended for heavy off-center loads.
Quick checklist
Because it is a double-rod cylinder, the effective area is the same on both sides. It provides an equal push and pull force of 345N at 0.5MPa, 483N at 0.7MPa, and 621N at 0.9MPa.
No, the SAID double-rod series uses a reduced mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2. The FB, CA, CB, and CR brackets are strictly for single-rod SAI cylinders.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.