
The AirTAC SAID32 Double Rod Cylinder SAID32BX25S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 25mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X25-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 25mm stroke. Because the piston rod exits both end covers, the annulus area is identical on both sides, yielding perfectly equal force and speed in both directions. This model generates 345N of thrust and pull at 0.5MPa, ensuring symmetric motion control.
Equipped with a magnet for position sensing, this variant works seamlessly with AirTAC CMSE reed and DMSE electronic switches. It features SUS304 stainless steel rods for superior corrosion resistance and utilizes PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides, and you can mount a cam or position flag on the rear rod end to trigger external limits.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX25S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Ideal for moving lightweight parts where equal push and pull thrust prevents binding in short-stage handling systems.
Drive a primary workpiece on the front rod while using the rear rod end to operate a secondary mechanism or mechanical flag.
The twin-rod geometry prevents piston rotation, providing stable guidance for precision clamping or gripping jaws.
Select this 32mm bore when an application demands identical push and pull forces, which a single-rod SAI cannot provide. If your project requires slightly less force, stepping down is not an option in this series, but stepping up to a 40mm bore yields 528N both ways at 0.5MPa. The twin-rod design inherently resists rotation and guides the load better than a single rod, making it ideal for compact 25mm stroke transfers.
As a dimensionally interchangeable ISO 15552 cylinder, it drops in seamlessly with other standard profile housings. It uses a reduced mounting accessory set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting the FB, CA, CB, and CR brackets found on single-rod variants. Note that the adjustable air cushions only decelerate the piston near stroke end; this cylinder will drift if air pressure is lost, so add a SAIL lock or external pilot check valve if position holding is required.
Quick checklist
Because it is a double-rod cylinder, the force is identical in both directions. It provides 345N at 0.5MPa, 483N at 0.7MPa, and 621N at 0.9MPa for both extending and retracting.
Yes, it is dimensionally interchangeable per ISO 15552. However, the SAID series uses a specific subset of mounts: Basic, FA, LB, TC, FTC, TCM1, and TCM2. It does not support the FB, CA, CB, or CR brackets.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.