
The AirTAC SAID32 Double Rod Cylinder SAID32BX275 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 275mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X275 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 275mm stroke. Because the piston rod exits both end covers, the annulus area is identical on extend and retract, yielding perfectly symmetric force and speed. It generates 345 N of thrust and pull each way at 0.5 MPa.
This variant uses SUS304 stainless steel rods (code B) for superior corrosion resistance in damp environments. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic switches. A rear rod protrusion requires extra clearance but provides a second mounting point or cam attachment.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX275 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 275 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×275 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a workpiece back and forth with identical 345 N force on both strokes, ensuring consistent timing for delicate part shifting.
The twin 12mm rods guide the payload against rotational torque, maintaining precise alignment for secondary machining operations.
Uses the protruding rear rod end to trip a mechanical limit switch or drive a secondary mechanism while the front rod handles the main load.
Select this 32mm bore when an application demands equal 345 N force in both directions, such as a symmetric transfer mechanism. If your task requires less push, stepping down is not an option as 32mm is the minimum size, but stepping up to a 40mm bore (528 N both ways) provides a heavier margin. Choose a double-rod design over a single-rod SAI when you need anti-rotation guidance or a rear-rod position flag.
This model uses PT tapered port threads. It supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR. Since the stroke is 275mm, the 12mm rod experiences bending stress under lateral loads; use an external guide rail to prevent rod-bearing wear. Note that standard air cushions only decelerate the piston near stroke end and will not hold a load if air pressure drops.
Quick checklist
It provides equal force in both directions due to the double-rod design. It outputs 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa for both extension and retraction.
Yes, it is dimensionally interchangeable per ISO 15552 standards. You can drop it in as a replacement for other ISO 15552 double-rod profile cylinders using the same mounting dimensions.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.