
The AirTAC SAID32 Double Rod Cylinder SAID32BX280 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 280mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X280 is a double-acting, double-rod ISO 15552 profile cylinder engineered for symmetric actuation. Because a rod exits both ends, the annulus area is identical on extend and retract, yielding equal force and speed in both directions. This 32mm bore generates 483N each way at 0.7 MPa, ensuring highly stable motion control.
This configuration features SUS304 stainless steel rods (code B) for superior corrosion resistance and uses PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement. A rear rod protrudes from the back cover, providing a convenient mounting point for a position flag, cam, or secondary mechanism.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX280 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 280 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×280 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Provides exactly 483N of force in both extend and retract directions at 0.7 MPa, ideal for pressing and marking operations requiring uniform pressure both ways.
Drives a primary workpiece on the front rod while the rear rod simultaneously operates a secondary mechanism or position flag, maximizing machine layout efficiency.
The twin-rod architecture keeps the load guided against rotation better than a single rod, ensuring precise linear movement without external linear bearings.
Select this double-rod model when your application requires identical push and pull forces, or when you need to drive a second mechanism from the rear of the cylinder. If your setup demands less force, stepping down is not an option in the SAID series, but stepping up to a 40mm bore provides 528N each way at 0.5 MPa for heavier loads. Unlike a single-rod SAI cylinder, the twin-rod design inherently resists torsional rotation.
This 280mm stroke unit is dimensionally interchangeable with other ISO 15552 double-rod cylinders. It uses a PT G1/8 port and supports mountings Basic, FA, LB, TC, FTC, TCM1, and TCM2. Since the stroke exceeds 300mm, ensure an external guide supports the load to prevent rod-bearing bending under side loads. Note that standard air cushions only decelerate the piston near stroke end; they do not hold the load if air pressure is lost.
Quick checklist
Because it is a double-rod cylinder, the push and pull forces are equal. It generates 345N at 0.5 MPa, 483N at 0.7 MPa, and 621N at 0.9 MPa in both directions.
Yes, the SAID32X280 is dimensionally interchangeable per ISO 15552 standards. It shares the same mounting footprint as other ISO 15552 double-rod profile cylinders, but omits FB, CA, CB, and CR mountings.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.