
The AirTAC SAID32 Double Rod Cylinder SAID32BX290S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 290mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X290-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 290mm stroke. Because the SUS304 stainless steel rod exits both end covers, the annulus area is identical on each side, yielding exactly 345N of force in both extend and retract directions at 0.5 MPa.
This through-rod design allows you to mount the primary workpiece on the front end and a position flag or cam on the rear to trigger CMSE or DMSE sensors. The extruded aluminum barrel includes sensor grooves on both sides, and the PT tapered ports thread directly into your existing pneumatic manifold block.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX290S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 290 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×290 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a shuttle mechanism where the 345N output must remain perfectly balanced in both directions without shifting momentum profiles.
Uses the twin SUS304 rods to guide a vertical lifting plate, preventing torsional twist during high-speed 30-800 mm/s transit.
Mounts the primary tool on the front rod end while the rear protrusion drives a DMSE solid-state sensor flag for precise tracking.
Select this 32mm twin-rod unit when an application demands equal push and pull forces alongside anti-rotation guidance. If you need higher thrust, stepping up to a 40mm bore provides 528N each way at 0.5 MPa, but the compact 32mm variant is ideal for tight machinery. At 290mm of stroke, the unsupported rod length increases; you should use an external guide rail to prevent rod-bearing bending under heavy side loads.
As a dimensionally interchangeable ISO 15552 component, it drops in seamlessly for other double-rod profile cylinders. It uses a specific mounting accessory set: Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). Note that the adjustable air cushions decelerate the piston near stroke ends but do not lock the load; if position holding without live air pressure is required, consider an external rod lock or the BSAID clamp-lock series.
Quick checklist
Because the rod occupies both sides of the piston, the extend and retract forces are equal. It provides 345N at 0.5 MPa, 483N at 0.7 MPa, and 621N at 0.9 MPa in both directions.
Yes, it is dimensionally interchangeable per ISO 15552 profile standards. It uses PT ports and supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, making it a direct for equivalent twin-rod cylinders.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.