
The AirTAC SAID32 Double Rod Cylinder SAID32BX30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 30mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X30-S is a double-acting, double-rod ISO 15552 profile cylinder engineered for symmetric force delivery. Because a SUS304 stainless steel rod exits both end covers, the effective piston area is identical in both directions, yielding 345 N of force on extend and retract at 0.5 MPa. This 32mm bore, 30mm stroke variant includes a built-in magnet for position sensing.
The twin-rod architecture allows you to mount the primary workpiece on one end and a cam or position flag on the opposite rear rod end. It features adjustable air cushions at both ends to decelerate the piston smoothly, and the extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Ideal for moving lightweight parts where the 345 N push and pull force must remain perfectly balanced across the 30mm stroke.
The twin SUS304 rods guide the load against rotation, providing stable linear movement for precision sliding fixtures.
Mount a cam or DMSE sensor target on the rear rod end to trigger external logic without interfering with the primary front work area.
Select this 32mm bore model when an application demands equal push and pull forces (345 N at 0.5 MPa) within a compact 30mm stroke. If your mechanism requires less force, stepping down is not an option as 32mm is the smallest standard SAID bore; stepping up to a 40mm bore increases the both-way output to 528 N at 0.5 MPa. Choose the double-rod SAID over a single-rod SAI when you need dual-side guidance, anti-rotation stability, or rear-rod actuation.
This cylinder uses PT tapered port threads (G1/8) and is dimensionally interchangeable per ISO 15552. The -S magnet enables precise tracking with AirTAC CMSE reed and DMSE electronic sensors. Note that the adjustable cushions only decelerate the piston near stroke end; this cylinder will not hold a load if air pressure is lost. For locking requirements, consider an external rod lock or the SAIL series.
Quick checklist
Because the double-rod design subtracts the rod area from both sides of the piston, the force is equal in both directions. It provides 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa for both extend and retract strokes.
Yes, it is dimensionally interchangeable with ISO 15552 profile cylinders. The SAID series supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, but omits FB, CA, CB, and CR styles which are single-rod only.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.