
The AirTAC SAID32 Double Rod Cylinder SAID32BX425 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 425mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X425 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 425mm stroke. Because the SUS304 stainless steel piston rod exits both end covers, the annulus area is identical on extend and retract. This yields exactly 345 N of force in both directions at 0.5 MPa, ensuring perfectly symmetric speed and thrust for demanding transfer tasks.
Beyond equal push and pull dynamics, the twin-rod architecture provides superior anti-rotation stability compared to a single-rod SAI. The rear rod extension is ideal for mounting a cam or position flag to trigger external limit switches. This variant uses PT tapered port threads and includes adjustable air cushions at both ends to decelerate the piston smoothly.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX425 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 425 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×425 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Moves workpieces between two stations with identical 345 N force and speed in both directions, preventing jerk on the return stroke.
The dual 12mm SUS304 rods guide the load against twisting forces, keeping the tool plate perfectly parallel over the 425mm travel.
Uses the protruding rear rod end to physically trip an external mechanical limit switch, providing a hard physical position confirmation.
Select this 32mm bore model when an application requires 345 N of bidirectional force at 0.5 MPa. If your payload is lighter, dropping down is not an option in this size range, but stepping up to a 40mm bore yields 528 N both ways if you need a higher margin of safety. Choose the SAID double-rod configuration over a standard single-rod cylinder when you need to drive twin mechanisms, prevent load twist, or mount rear-facing sensing flags.
At 425mm of travel, the 12mm diameter rod is highly susceptible to side-load bending and bearing wear. An external linear guide is strongly recommended to support the payload. Remember that the adjustable cushions only decelerate the piston near stroke end; they do not hold the load. If air pressure drops, the cylinder will drift. For dead-load holding, use an external pilot-operated check valve or consider the SAIL lock variant. This model is dimensionally interchangeable per ISO 15552.
Quick checklist
Because the rod occupies both sides of the piston, the effective area is equal in both directions. It outputs 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa for both extend and retract strokes.
It uses a reduced ISO 15552 mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2. It omits FB, CA, CB, and CR brackets which are strictly for single-rod SAI cylinders. Ensure you leave clearance for the rear rod protrusion.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.