
The AirTAC SAID32 Double Rod Cylinder SAID32BX450 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 450mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X450 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 450mm stroke. Because the piston rod extends from both end covers, the annulus area is identical on both sides, yielding exactly 345 N of force in both extend and retract directions at 0.5 MPa. This symmetric output is ideal for applications requiring consistent push and pull dynamics.
This specific configuration features SUS304 stainless steel rods (material code B) for superior corrosion resistance and utilizes PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides, allowing you to mount a rear-position flag or cam on the opposing rod end to trigger external mechanisms without interfering with the primary workpiece.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX450 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Provides exactly 345 N of force in both directions, ensuring perfectly balanced push and pull movements for precision transfer assemblies.
The twin-rod architecture inherently resists mechanical rotation, keeping guided slides perfectly aligned over the 450mm travel distance.
The extended rear rod safely drives a secondary cam or limit flag to trigger sequential operations without cluttering the primary work area.
Choose this 32mm bore when you need 345 N of equal bidirectional force; if your application requires less thrust, dropping to a smaller bore is advisable, while stepping up provides higher force. A double-rod design is selected over a single-rod SAI when you need dual-side guidance to prevent rotation or want to drive a secondary mechanism from the rear rod. Remember that a plain SAID does not hold position unpowered—air loss causes drift, so use a SAIL lock or external check valve if static holding is required.
At 450mm of stroke, the 12mm rod requires careful alignment to avoid bearing bending; always use an external guide to support long unsupported loads. This cylinder is dimensionally interchangeable per ISO 15552, accepting Basic, FA, LB, TC, FTC, TCM1, or TCM2 mounts (omitting FB, CA, CB, CR). It operates at 30-800 mm/s without a magnet, so external sensors are needed for position detection.
Quick checklist
Because it is a double-rod cylinder, the effective piston area is identical on both sides. It delivers 345 N of force in both the extend and retract directions at 0.5 MPa, and 621 N at 0.9 MPa.
Yes, the SAID32X450 is dimensionally interchangeable with other ISO 15552 profile cylinders. It uses standard mounting accessories like FA, LB, and TC, but note it requires rear-rod clearance due to the through-rod design.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.