
The AirTAC SAID32 Double Rod Cylinder SAID32BX45S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 45mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X45-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 45mm stroke. Because the SUS304 stainless steel rod exits both end covers, the annulus area is identical on extend and retract, yielding exactly 345N of force each way at 0.5 MPa. The integrated magnet (-S) directly supports rear-side position sensing using AirTAC CMSE reed or DMSE electronic switches.
This through-rod architecture provides superior anti-rotation guidance compared to a single-rod SAI. You can mount the primary workpiece on the front rod end and use the rear protrusion to carry a cam or limit flag. It uses adjustable air cushions at both ends to decelerate the piston smoothly near the stroke limits.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX45S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a dual-station actuation mechanism where the 345N output must remain perfectly matched on both the extend and retract strokes.
Utilizes the twin SUS304 rods to guide a vertical slide securely, preventing torsional drift without external linear bearings.
Mounts the primary tool on the front rod while the rear rod end drives a cam flag past a DMSE electronic sensor for exact positioning.
Select this 32mm bore when an application demands symmetric force and speed in both directions, offering 345N at 0.5 MPa. If your mechanism requires less force, stepping down is not an option as 32mm is the smallest SAID size; stepping up to a 40mm bore raises the both-way output to 528N at 0.5 MPa. The double-rod design is chosen over a single-rod cylinder when twin-side load guidance or rear-rod actuation is required.
This cylinder is dimensionally interchangeable per ISO 15552, utilizing a PT tapered port (G1/8) and a 12mm rod with an M10x1.25 thread. It supports mountings Basic, FA, LB, TC, FTC, TCM1, and TCM2. Note that the adjustable air cushion only decelerates the piston; it does not hold a load. If position holding without live pressure is needed, use a SAIL lock, BSAID clamp-lock, or external rod lock.
Quick checklist
Because the rod occupies both sides of the piston, the effective area is equal in both directions. It provides 345N of force each way at 0.5 MPa, and 621N each way at 0.9 MPa.
Yes. The SAID32X45-S is a profile cylinder with standard ISO 15552 mounting interface dimensions, making it a direct replacement for other ISO 15552 double-rod cylinders. It uses a PT G1/8 port and an M10x1.25 rod thread.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.