
The AirTAC SAID32 Double Rod Cylinder SAID32BX475S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 475mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X475-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 475mm stroke. Because the piston rod extends from both end covers, the effective annulus area is identical on both sides. This means extend and retract forces are perfectly equal, providing 483 N of thrust and pull in either direction at 0.7 MPa.
Equipped with a magnetic piston (-S) for use with AirTAC CMSE reed and DMSE electronic sensors, this variant uses SUS304 stainless steel (code B) for both rods to resist corrosion. The extruded aluminum barrel includes sensor grooves on both sides, and the rear rod protrusion allows you to mount a secondary cam or position flag opposite the primary workpiece.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX475S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 475 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×475 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a workpiece forward and backward with identical 483 N force at 0.7 MPa, ensuring consistent movement speeds for delicate handling tasks.
The twin SUS304 rods keep the load guided and prevent rotational drift during vertical or horizontal pressing operations.
Mounts a cam or DMSE electronic sensor target on the rear rod end to track stroke position from the opposite side of the machine.
Choose this 32mm bore when an application requires symmetric force and dual-side guidance, stepping down from a 40mm bore (which yields 528 N at 0.5 MPa) if the extra push power is unnecessary. A double-rod design is preferred over a single-rod SAI when you need to drive twin loads, prevent rotation, or track position from the back of the cylinder. Note that a plain SAID does not hold position if air pressure is lost; for locking requirements, consider SAIL or BSAID variants.
At 475mm of stroke, the 12mm diameter rod and M10x1.25 thread can handle moderate side loads, but an external guide rail is recommended to prevent rod-bearing bending. This cylinder is dimensionally interchangeable per ISO 15552 and uses a PT tapered G1/8 port. It supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mountings, omitting the FB, CA, CB, and CR options found on single-rod models.
Quick checklist
Because it is a double-rod cylinder, the force is identical in both directions. It provides 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa for both extension and retraction.
Yes, the SAID32X475-S is dimensionally interchangeable per ISO 15552. It shares the standard mounting footprint and uses the same accessory set (Basic, FA, LB, TC, FTC, TCM1, TCM2) as comparable profile cylinders.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.