
The AirTAC SAID32 Double Rod Cylinder SAID32BX500 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 500mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X500 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 500mm stroke. Because the piston rod exits both end covers, the annulus area is identical on extend and retract, yielding exactly 345N of force in each direction at 0.5MPa. This symmetric output is ideal for applications requiring consistent push and pull dynamics.
This specific configuration utilizes a SUS304 stainless steel rod (option B) for superior corrosion resistance and includes PT tapered port threads. The extruded aluminum barrel integrates sensor grooves on both sides, allowing you to mount CMSE reed or DMSE electronic switches along the primary stroke or near the rear rod end for dual-side confirmation.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX500 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a transfer carriage where the equal 345N push and pull forces prevent jerky movements and ensure smooth material handling across the 500mm stroke.
Uses the protruding rear rod end to trigger a mechanical limit valve or cam, providing a physical mechanical sequence alongside the primary front-rod work.
The twin-rod architecture keeps the load guided and prevents rotation without needing external linear bearings, ideal for compact lifting fixtures.
Select this 32mm bore when you need equal bidirectional force and anti-rotation guidance, stepping up from smaller bores but avoiding the larger 483N (at 0.7MPa) pull force of a 40mm variant. A double-rod design is preferred over a single-rod SAI when you need to mount a cam or position flag on the rear rod, or drive a secondary mechanism. Remember that the adjustable air cushions only decelerate the piston near stroke end; this cylinder will drift if air pressure is lost, so use an external rod lock or a SAIL cylinder if static holding is required.
At 500mm of stroke, the 12mm rod requires careful alignment to prevent rod-bearing bending under side loads, making an external guide rail essential for long unsupported travel. The SAID mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting the FB, CA, CB, and CR styles found on single-rod versions. It is dimensionally interchangeable per ISO 15552 as a direct replacement for other standard double-rod profile cylinders.
Quick checklist
Because it is a double-rod cylinder, the force is identical in both directions due to equal annulus areas. It provides 345N at 0.5MPa, 483N at 0.7MPa, and 621N at 0.9MPa for both extend and retract strokes.
Yes, it is dimensionally interchangeable per ISO 15552. However, the SAID series uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and does not support the FB, CA, CB, or CR mounts found on single-rod SAI cylinders.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.