
The AirTAC SAID32 Double Rod Cylinder SAID32BX500S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 500mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X500-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 500mm stroke. Because the piston rod exits both end covers, the effective annulus area is identical in both directions, yielding exactly 483N of force at 0.5 MPa on extend and retract. Equipped with a magnet, it supports CMSE reed and DMSE electronic sensors.
This variant uses SUS304 stainless steel rods for superior corrosion resistance and features PT tapered port threads. The twin-rod architecture provides dual-side guidance and anti-rotation stability, while the extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX500S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a transfer carriage where the 483N pull and push forces must be perfectly matched to avoid jerky movements during bidirectional material handling.
Powers a vertical lift gate requiring strict lateral stability, using the twin rods to prevent torsion and maintain precise alignment over the 500mm travel.
Actuates a clamping mechanism on the front rod while the rear rod end drives a physical limit flag past DMSE solid-state sensors for position verification.
Choose this 32mm bore when an application demands equal force and speed in both travel directions, offering 345N at 0.5 MPa. If your mechanism requires less force, stepping down is not an option as 32mm is the smallest size, but stepping up to a 40mm bore increases the bidirectional force to 528N. The double rod is preferred over a single-rod SAI when you need to mount a position flag or cam on the rear rod, or when strict anti-rotation guidance is required.
At 500mm stroke, the unsupported rod length increases; use an external guide to prevent rod-bearing bending under side loads. This cylinder is dimensionally interchangeable per ISO 15552. Note that a plain SAID does not hold position unpowered—use SAIL or BSAID for locking needs. The mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
Because it is a double-rod cylinder, the force is identical in both directions. It provides 345N at 0.5 MPa, 483N at 0.7 MPa, and 621N at 0.9 MPa for both extending and retracting.
Yes, the SAID32X500-S is dimensionally interchangeable per ISO 15552 and uses standard mounting accessories. It omits FB, CA, CB, and CR mounts but supports Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.