
The AirTAC SAID32 Double Rod Cylinder SAID32BX550 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 550mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X550 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and a 550mm non-standard stroke. Because the piston rod exits both end covers, the annulus area is identical on extend and retract, yielding equal force and speed in both directions. This provides 483N of thrust and pull at 0.7 MPa, making it ideal for symmetric motion tasks.
This configuration uses SUS304 stainless steel rods (code B) for superior corrosion resistance and a PT tapered port thread. The rear rod extension can drive a secondary mechanism or mount a position flag, while the extruded aluminum barrel integrates sensor grooves on both sides. Note that the 550mm stroke exceeds the standard 500mm maximum for this bore, making it a made-to-order item requiring extra rear-rod clearance.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX550 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 550 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×550 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a transfer carriage with identical 483N push and pull forces, ensuring consistent acceleration regardless of travel direction.
The twin 12mm SUS304 rods guide the load against rotation without needing external linear bearings, saving space on short-stroke slides.
Mounts a physical cam or limit flag on the rear rod extension to trigger external mechanical switches, compensating for the lack of a piston magnet.
Select this double-rod cylinder when your mechanism requires equal force both ways (483N at 0.7 MPa) and anti-rotation guidance that a single-rod SAI cannot provide. If you need less force, stepping down is not an option in the 32mm bore class, but stepping up to a 40mm bore yields 739N. Because the 550mm stroke is non-standard and exceeds the 500mm limit, expect a made-to-order lead time.
With an unsupported 550mm stroke, the 12mm rod is susceptible to bending under side loads; use an external guide rail to prevent premature rod-bearing wear. This model lacks a magnet, so position sensing requires external flags on the rear rod rather than CMSE or DMSE switches. For direct compatibility, it matches ISO 15552 mounting dimensions using the SAID accessory set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Remember that standard air cushions only decelerate the piston near stroke end; they do not hold the load if air pressure is lost.
Quick checklist
Because it is a double-rod cylinder, the effective piston area is the same on both sides. It delivers 345N at 0.5 MPa and 483N at 0.7 MPa in both the extend and retract directions.
Yes, it shares the exact ISO 15552 mounting interface and dimensions, making it a direct replacement for other ISO 15552 double-rod profile cylinders. It uses a PT port and supports Basic, FA, LB, and TC mountings.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.