
The AirTAC SAID32 Double Rod Cylinder SAID32BX55S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 55mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X55-S is a double-acting, double-rod ISO 15552 profile cylinder. Because a rod exits both end covers, the annulus area is identical on extend and retract, yielding exactly 483 N of force in both directions at 0.5 MPa. This through-rod geometry provides superior anti-rotation guidance compared to a single-rod SAI.
This specific configuration features SUS304 stainless steel rods (option B) for corrosion resistance and includes a magnet (-S) for position sensing. The integrated magnet triggers AirTAC CMSE reed and DMSE electronic switches housed in the dual-side sensor grooves. It uses a PT G1/8 port and adjustable air cushions at both ends.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX55S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 55 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×55 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a workpiece from one end while the opposing rear rod simultaneously shifts a secondary mechanism, utilizing the exact 483 N output in both directions.
The twin SUS304 rods keep the load guided and prevent rotation during transit, ensuring precise linear movement without external guides.
Mounts a physical cam or limit flag on the rear protruding rod to trigger external mechanical sensors, while the -S magnet operates internal CMSE switches.
Choose this 32 mm bore when an application requires 483 N of symmetric force both ways. If you need less force, a smaller bore is required; if you need more push or pull, stepping up to a 40 mm bore yields 739 N at 0.5 MPa. The double-rod design is selected over a single-rod cylinder when you need to mount a cam or position flag on the rear rod, or when dual-side load guidance is critical.
As a true ISO 15552 profile cylinder, it is dimensionally interchangeable with other ISO 15552 double-rod cylinders. To match this exact unit, specify bore 32, stroke 55, PT G1/8 port, SUS304 rods, and the -S magnet. Note that the adjustable air cushion only decelerates the piston near stroke end; it does not hold the load. If position holding without air pressure is required, use a SAIL lock cylinder or an external pilot-operated check valve.
Quick checklist
Because it is a double-rod cylinder, the force is identical in both directions. It provides 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa for both extend and retract strokes.
Yes, the SAID32X55-S is dimensionally interchangeable per ISO 15552. It shares the standard mounting footprint and uses the Basic, FA, LB, TC, FTC, TCM1, and TCM2 accessory set, making it a direct replacement.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.