
The AirTAC SAID32 Double Rod Cylinder SAID32BX60 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 60mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X60 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 60mm stroke. Because the piston rod exits both end covers, the annulus area is identical on both sides, yielding exactly 345N of force in both extend and retract directions at 0.5 MPa. This symmetric output is ideal for applications requiring consistent push and pull dynamics.
Equipped with SUS304 stainless steel rods, this variant provides excellent corrosion resistance for harsher environments. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting, while the PT tapered port threads ensure a robust pneumatic seal.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX60 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Transfers loads with identical 345N push and pull force, ensuring stable velocity and thrust profiles for precision feeding tasks.
The twin-rod architecture prevents piston rotation, providing stable linear guidance for lifting and pressing small components.
Drives a primary workpiece on the front rod while utilizing the rear rod extension to trigger external limit flags or secondary mechanisms.
Choose this 32mm bore when an application demands equal force both ways (345N at 0.5 MPa) or anti-rotation guidance that a single-rod SAI cannot provide. If your project requires higher thrust, stepping up to the 40mm bore increases the bidirectional force to 528N at 0.5 MPa. The double-rod design allows mounting a workpiece on the front rod and a position flag or cam on the rear rod for dual-side actuation.
As a dimensionally interchangeable ISO 15552 profile cylinder, it serves as a direct replacement for other standard double-rod cylinders. It uses a reduced mounting accessory set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR brackets. Note that the adjustable air cushions only decelerate the piston near stroke end; this cylinder will drift if air pressure is lost, so a SAIL or BSAID lock is required for position holding.
Quick checklist
Because it is a double-rod cylinder, the effective piston area is the same in both directions. It delivers 345N of force both extending and retracting at 0.5 MPa, and 621N both ways at 0.9 MPa.
Yes, the SAID32X60 is a true ISO 15552 profile cylinder with standard mounting dimensions, making it interchangeable with other ISO 15552 double-rod cylinders. It uses PT ports and supports Basic, FA, LB, and TC mounting accessories.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.