
The AirTAC SAID32 Double Rod Cylinder SAID32BX60S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 60mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X60-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 60mm stroke. Because the piston rod exits both end covers, the effective annulus area is identical on extend and retract, yielding exactly 483N of force in both directions at 0.7 MPa. The -S suffix indicates an integrated magnet for position sensing.
This variant is equipped with SUS304 stainless steel rods for superior corrosion resistance and includes dual-side sensor grooves compatible with AirTAC CMSE reed and DMSE electronic switches. Its extruded aluminum barrel ensures it is dimensionally interchangeable per ISO 15552, while the rear rod end provides a convenient mounting point for a cam or limit flag without interfering with the primary workpiece.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX60S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a lightweight indexing gate with identical 483N force and speed in both directions, ensuring consistent dwell times regardless of travel direction.
Actuates a small clamping jaw on the front rod while the rear SUS304 rod end triggers a DMSE solid-state sensor for precise mid-stroke confirmation.
Guides a compact pick-and-place head where the twin rods prevent torsional twist during rapid 30-800 mm/s lateral movements.
Select this 32mm bore when an application demands equal push and pull forces—such as 483N at 0.7 MPa—along with dual-side guidance to prevent rotation. If your mechanism requires less force, stepping down is not an option as 32mm is the smallest SAID bore; however, stepping up to a 40mm bore increases the both-way output to 739N at 0.7 MPa. Choose the SAID twin-rod design over a single-rod SAI when you need to drive a secondary mechanism from the rear or require symmetric speed. Note that the adjustable air cushions only decelerate the piston near stroke end; this cylinder will drift if air pressure is lost, so a SAIL or BSAID lock variant is required for fail-safe position holding. Ensure your setup uses PT tapered port threads and a Basic, FA, LB, TC, FTC, TCM1, or TCM2 mount.
Quick checklist
Because the rod occupies both sides of the piston, the push and pull forces are equal. It generates 345N at 0.5 MPa, 483N at 0.7 MPa, and 621N at 0.9 MPa in both directions.
Yes, the SAID32X60-S is dimensionally interchangeable per ISO 15552. It shares the same mounting footprint and port sizes (G1/8 / PT) as comparable 32mm double-rod profile cylinders, though it uses the AirTAC mounting accessory set (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.