verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAID32 Double Rod Cylinder SAID32BX650S

The AirTAC SAID32 Double Rod Cylinder SAID32BX650S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 650mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke650 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$139.52 $152.63Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAID32 stroke, mounting and version on one page All SAID32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAID32 Double Rod Cylinder SAID32BX650S

The AirTAC SAID32X650-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 650mm stroke. Because the piston rod exits both ends, the effective annulus area is identical on extend and retract, yielding exactly 345 N of force in both directions at 0.5 MPa. This specific configuration includes a SUS304 stainless steel rod (option B) and a built-in magnet for position sensing.

The twin-rod architecture allows you to mount the primary workpiece on the front rod and a cam or position flag on the rear rod to trigger external sensors. Equipped with PT tapered ports and dual-side sensor grooves, it accepts AirTAC CMSE reed and DMSE electronic switches. Note that the 650mm stroke is a non-standard made-to-order length exceeding the 500mm standard maximum for this bore, and the through-rod design requires extra rear clearance.

Airtac SAID32 Double Rod Cylinder SAID32BX650S Technical Specifications

ModelAirtac SAID32 Double Rod Cylinder SAID32BX650S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke650 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAID32 Double Rod Cylinder SAID32BX650S

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×650Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAID32 Double Rod Cylinder SAID32BX650S Is Used

sync_alt

Symmetric Force Transfer

Drives a shuttle mechanism where the precise 345 N force must remain identical whether pushing or pulling the carriage, preventing directional speed variations.

straighten

Dual-Guided Anti-Rotation Slide

Uses the twin rods exiting both end covers to keep a vertically lifted pallet guided and resistant to torsional twisting without external guide rails.

settings_input_component

Rear-Cam Position Flagging

Mounts the primary tool on the front rod while utilizing the rear rod protrusion to physically trip a mechanical limit switch or mount a DMSE sensor target.

Is the Airtac SAID32 Double Rod Cylinder SAID32BX650S the Right Cylinder?

Choose this double-rod configuration when an application demands equal push and pull forces, or when a rear rod is needed for external tracking and anti-rotation guidance. If you need less force, stepping down is not an option below 32mm in this series, but stepping up to a 40mm bore provides 528 N each way at 0.5 MPa. The SUS304 rod provides superior corrosion resistance compared to standard carbon steel.

As a dimensionally interchangeable ISO 15552 profile cylinder, it serves as a direct replacement for other standard double-rod actuators. Specify PT port threads, your required mounting from the SAID set (Basic, FA, LB, TC, FTC, TCM1, TCM2), and the -S magnet for CMSE/DMSE switches. Because the stroke is 650mm, the long unsupported rod is susceptible to bending under side loads; always use an external guide rail. Note that the adjustable air cushions only decelerate the piston near stroke end and do not hold the load if air pressure is lost—use a SAIL or BSAID lock cylinder for pneumatic holding.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAID32 Double Rod Cylinder SAID32BX650S FAQ

Because it is a double-rod cylinder, the push and pull forces are equal. It generates 345 N in both directions at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa.

Yes, it is dimensionally interchangeable per ISO 15552 profile standards. However, ensure you have rear clearance for the through-rod, select the correct PT port, and use SAID-compatible mounts (Basic, FA, LB, TC, FTC, TCM1, TCM2).

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAID32 Double Rod Cylinder SAID32BX650S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAID32BX650S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.