
The AirTAC SAID32 Double Rod Cylinder SAID32BX70 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 70mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X70 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 70mm stroke. Because the SUS304 stainless steel rod exits both end covers, the annulus area is identical on extend and retract, yielding equal push and pull forces of 483N at 0.7 MPa.
This twin-rod layout allows mounting a workpiece on the front rod and a position flag or cam on the rear rod. It utilizes adjustable air cushions at both ends and PT-tapered G1/8 ports for reliable pneumatic integration.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX70 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 70 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a shuttle mechanism where the 483N pulling and pushing forces must remain perfectly balanced during bidirectional material handling.
Powers a precision linear slide using the twin SUS304 rods to guide the load and prevent rotational drift without external rails.
Actuates a clamping fixture while the protruding rear rod directly triggers an external mechanical limit switch for precise end-of-stroke confirmation.
Select this 32mm bore when an application demands 483N of force symmetrically in both directions, stepping down from a 40mm bore (528N at 0.5 MPa) for a compact footprint, or up from smaller non-standard options. A double-rod design is chosen over a single-rod SAI when dual-side guidance, anti-rotation stability, or rear-rod sensing is required. As a dimensionally interchangeable ISO 15552 profile cylinder, it serves as a direct replacement matching the 32mm bore, 70mm stroke, PT port, and Basic/FA/LB/TC/FTC/TCM1/TCM2 mounting set. Note that the standard air cushion only decelerates the piston near stroke end; it does not hold the load if air pressure is lost. For position holding without live pressure, consider an external rod lock or the SAIL/BSAID series.
Quick checklist
Because it is a double-rod cylinder, the effective piston area is the same on both sides. It outputs 345N at 0.5 MPa, 483N at 0.7 MPa, and 621N at 0.9 MPa in both the extend and retract directions.
Yes, the SAID32X70 is dimensionally interchangeable per ISO 15552 standards. It shares the exact mounting interface and footprint of comparable profile cylinders, though it uses a reduced mounting accessory set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR brackets.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.