
The AirTAC SAID32 Double Rod Cylinder SAID32BX700 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 700mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X700 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 700mm stroke. Because the piston rod exits both end covers, the annulus area is identical on extend and retract, yielding equal force and speed in both directions. This specific bore produces 345 N of thrust and pull at 0.5 MPa.
This configuration utilizes a SUS304 stainless steel rod for superior corrosion resistance and includes PT tapered port threads. The extruded aluminum barrel integrates sensor grooves on both sides for flexible mounting of position switches. Note that the rear rod protrudes during operation, requiring appropriate clearance in your machine design.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX700 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a transfer shuttle where the 345 N output must remain identical whether pushing or pulling the payload, preventing speed variations.
Twin rods guide the load through 700mm of travel, resisting torsional twist without needing external linear bearings.
Uses the protruding rear rod end to trigger a mechanical limit valve or cam while the front rod performs the primary work.
Choose this double-rod configuration when your mechanism requires symmetrical force, anti-rotation stability, or a rear-rod extension for cam actuation. If your application needs less force, stepping down is not an option in this bore series, but stepping up to a 40mm bore provides 528 N both ways at 0.5 MPa. Unlike a single-rod SAI cylinder, this SAID model ensures the workpiece travels at consistent velocities regardless of direction.
This cylinder uses a reduced mounting accessory set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR brackets. At 700mm of stroke, the 12mm rod is highly susceptible to side-load bending; an external guide rail is strongly recommended to prevent premature bearing wear. Plain SAID cylinders drift when air pressure is lost, so add a SAIL lock or external pilot check valve if position holding is required.
Quick checklist
The SAID32X700 provides equal force in both extend and retract directions due to its double-rod design. It outputs 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa.
Yes, it is dimensionally interchangeable per ISO 15552 standards. It uses a PT G1/8 port and accepts standard mounting brackets like FA, LB, and TC, making it a direct replacement for other ISO 15552 double-rod profile cylinders.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.