verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAID32 Double Rod Cylinder SAID32BX75S

The AirTAC SAID32 Double Rod Cylinder SAID32BX75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 75mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke75 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$72.84 $81.44Save 10% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAID32 stroke, mounting and version on one page All SAID32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAID32 Double Rod Cylinder SAID32BX75S

The AirTAC SAID32X75-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 75mm stroke. Because the piston rod extends from both end covers, the annulus area is identical on both sides, yielding exactly 483 N of force in both extend and retract directions at 0.7 MPa. This symmetric output is ideal for mechanisms requiring consistent power and speed throughout the cycle.

Equipped with a -S magnet, this variant supports AirTAC CMSE reed and DMSE electronic sensors housed within the dual-side barrel grooves. The rods are constructed from SUS304 stainless steel (code B) for superior corrosion resistance, and the fluid ports utilize a PT tapered thread standard. The rear rod extension can drive a secondary mechanism or mount a position flag, while the twin rods inherently resist rotational torque.

Airtac SAID32 Double Rod Cylinder SAID32BX75S Technical Specifications

ModelAirtac SAID32 Double Rod Cylinder SAID32BX75S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke75 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAID32 Double Rod Cylinder SAID32BX75S

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×75Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAID32 Double Rod Cylinder SAID32BX75S Is Used

sync_alt

Symmetric Force Transfer

Drives a transfer shuttle where the 483 N pull and push forces must be perfectly equal, ensuring consistent acceleration regardless of travel direction.

straighten

Anti-Rotation Guiding

Powers a vertical lift slide where the twin SUS304 rods prevent the platform from twisting under offset loads, maintaining strict parallelism.

settings_input_component

Rear-Rod Cam Actuation

Actuates a primary workpiece on the front rod while the rear rod end simultaneously trips a mechanical limit valve or secondary mechanism.

Is the Airtac SAID32 Double Rod Cylinder SAID32BX75S the Right Cylinder?

Choose this 32mm bore when an application demands 483 N of symmetric force both ways. If your mechanism requires less push/pull power, stepping down is not an option in the SAID series minimum range, but stepping up to a 40mm bore increases the both-way output to 739 N at 0.7 MPa. Select the double-rod SAID over a single-rod SAI when you need dual-side guidance, anti-rotation stability, or a rear rod end for secondary cam actuation. To integrate this cylinder, match the 32mm bore, 75mm stroke, PT G1/8 port, and choose from the SAID mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Note that FB, CA, CB, and CR mounts are single-rod SAI only.

This cylinder is dimensionally interchangeable per ISO 15552, serving as a direct replacement for other ISO 15552 double-rod cylinders. Keep in mind that the adjustable air cushions at both ends only decelerate the piston near stroke end; they do not lock or hold the load. If air pressure is lost, the piston will drift. For position holding without live pressure, consider an external rod lock or the SAIL/BSAID series. The overall length is longer than a single-rod cylinder because the rear rod protrudes, requiring extra clearance in your layout.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAID32 Double Rod Cylinder SAID32BX75S FAQ

Because it is a double-rod cylinder, the effective piston area is the same on both sides. It delivers 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa in both the extend and retract directions.

Yes, the SAID32X75-S is an extruded aluminum profile cylinder with standard ISO 15552 mounting dimensions, making it dimensionally interchangeable with other ISO 15552 double-rod cylinders. It uses a PT G1/8 port and supports CMSE/DMSE sensors.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAID32 Double Rod Cylinder SAID32BX75S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAID32BX75S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.