
The AirTAC SAID32 Double Rod Cylinder SAID32BX80 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 80mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X80 is a double-acting, double-rod ISO 15552 profile cylinder featuring an 80mm stroke and a 32mm bore. Because the piston rod exits both end covers, the effective annulus area is identical on extend and retract. This yields equal bidirectional force and speed, providing exactly 483N of thrust and pull at 0.7 MPa.
This configuration uses a SUS304 stainless steel rod (code B) for superior corrosion resistance in harsh environments. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting. You can attach a workpiece to the front rod end while using the rear protrusion to mount a cam or position flag for external tracking.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX80 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a secondary mechanism from the rear rod end while the front rod performs the primary work, maintaining equal 483N force and matching speed in both directions.
The twin-rod geometry prevents piston rotation during travel, providing stable linear guidance for precision sliding fixtures without external guides.
Actuates two separate stations simultaneously from a single piston, using both rod ends to push and pull independent tooling with synchronized motion.
Select this 32mm bore when an application requires symmetric force (483N each way at 0.7 MPa) and inherent anti-rotation guidance that a single-rod SAI cannot provide. If your mechanism needs less force, stepping down is not an option in this series, but stepping up to a 40mm bore increases the bidirectional output to 739N. This cylinder uses PT tapered port threads (G1/8) and accepts Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts (omitting FB, CA, CB, and CR).
It is dimensionally interchangeable per ISO 15552 standards. Note that a plain SAID does not hold position or carry loads when air pressure is lost; use a SAIL or BSAID variant if pneumatic locking is required. The overall length is longer than a single-rod cylinder to accommodate the rear rod extension.
Quick checklist
Because it is a double-rod cylinder, the force is equal in both directions. It provides 345N at 0.5 MPa, 483N at 0.7 MPa, and 621N at 0.9 MPa for both extending and retracting.
Yes, the SAID32X80 is dimensionally interchangeable with other ISO 15552 profile cylinders. It shares standard mounting dimensions and uses a G1/8 port, making it a direct replacement for standard ISO 15552 double-rod units.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.