
The AirTAC SAID32 Double Rod Cylinder SAID32BX800S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 800mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X800-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 800mm stroke. Because the piston rod exits both end covers, the annulus area is identical on both sides, yielding exactly 483 N of force in both extend and retract directions at 0.7 MPa. This through-rod geometry provides superior anti-rotation guidance compared to a single-rod SAI.
This specific configuration includes a SUS304 stainless steel rod (option B) for superior corrosion resistance and an integrated magnet (-S) for position sensing. The extruded aluminum barrel features sensor grooves on both sides, allowing you to mount CMSE reed or DMSE electronic switches along the body while using the rear rod end to drive a secondary mechanism or cam.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX800S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a transfer carriage where the 483 N extend and retract forces must be perfectly equal, preventing jerky movements during bidirectional material shuttling.
Uses the twin-rod geometry to guide a vertical lifting slide, keeping the load stabilized and preventing rotational twist without external linear bearings.
Mounts the primary tool on the front rod end while utilizing the rear rod protrusion to trigger a physical limit cam, operating alongside DMSE electronic sensors.
Select this 32mm bore model when an application demands perfectly symmetric force and speed, offering 345 N each way at 0.5 MPa. If your mechanism requires less force, stepping down is not an option as 32mm is the smallest standard SAID bore; however, stepping up to a 40mm bore increases the bidirectional force to 528 N at 0.5 MPa. Choose the double-rod SAID over a single-rod SAI when you need to mount a workpiece on one end and a position flag on the other, or when dual-side guidance is critical to prevent load rotation.
At 800mm stroke, the unsupported rod length is significant; you must use an external guide to prevent rod-bearing bending and excessive side loading. Remember that the adjustable air cushions at both ends only decelerate the piston near stroke end and do not hold the load. If air pressure is lost, the cylinder will drift. For position holding, use an external rod lock or consider the BSAID clamp-lock variant. This cylinder is dimensionally interchangeable per ISO 15552, uses a PT G1/8 port, and supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts (omitting FB, CA, CB, and CR).
Quick checklist
Because it is a double-rod cylinder, the effective piston area is the same on both sides. It provides 345 N of force at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa in both the extend and retract directions.
Yes, the SAID32X800-S is dimensionally interchangeable per ISO 15552 and can serve as a direct replacement for other ISO 15552 double-rod profile cylinders. It uses a PT G1/8 port and standard mounting dimensions.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.