
The AirTAC SAID32 Double Rod Cylinder SAID32BX850 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 850mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X850 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 850mm stroke. Because the piston rod exits both end covers, the effective annulus area is identical on extend and retract, yielding exactly 483N of force in each direction at 0.7 MPa. This equal-force symmetry prevents speed variations between strokes.
This configuration uses SUS304 stainless steel rods (material code B) for superior corrosion resistance and includes PT tapered port threads. The extruded aluminum barrel integrates sensor grooves on both sides, allowing you to mount position switches independently on either end. Note that the through-rod design requires additional rear clearance compared to a single-rod SAI.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX850 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 850 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×850 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Push and pull identical loads at matching speeds using the equal 483N annulus force, eliminating the speed differential common to single-rod actuators.
Leverage the twin-rod geometry to guide vertical lifts and linear slides, preventing piston rotation without needing external guide rods.
Mount the workpiece on the front rod and a cam or position flag on the rear protrusion to actuate external mechanical limit switches.
Choose this 32mm bore when an application demands 483N of symmetrical force at 0.7 MPa; step down if lower force is acceptable, or up to the 40mm bore (739N at 0.7 MPa) for heavier loads. A double-rod design is preferred over a single-rod SAI when you need dual-side guidance to prevent rotation, or require a rear rod extension to mount a cam and trigger a sensor. At 850mm, this stroke approaches the maximum standard limit for this bore, so an external guide is recommended to prevent rod-bearing bending under side loads.
As a true ISO 15552 profile cylinder, it is dimensionally interchangeable with other ISO 15552 double-rod cylinders. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2. Note that the adjustable air cushions only decelerate the piston near stroke end; this cylinder will drift if air pressure is lost. For position holding, consider SAIL or BSAID variants. Confirm exact overall length from the datasheet to ensure rear-rod clearance.
Quick checklist
Because the rod occupies both sides of the piston, the push and pull forces are equal. It delivers 345N at 0.5 MPa, 483N at 0.7 MPa, and 621N at 0.9 MPa in both directions.
Yes, it shares the exact ISO 15552 mounting interface dimensions, making it a direct replacement for other ISO 15552 double-rod profile cylinders, though you must account for the extra rear-rod clearance.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.