
The AirTAC SAID32 Double Rod Cylinder SAID32BX85S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 85mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X85-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 85mm stroke. Because the piston rod extends from both end covers, the effective annulus area is identical in both directions, yielding an equal push and pull force of 483 N at 0.7 MPa. The -S suffix indicates an integrated magnet for position sensing.
This specific configuration uses a SUS304 stainless steel rod for superior corrosion resistance, paired with PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides, allowing you to mount CMSE reed or DMSE electronic switches along either end of the body to track the dual rod ends.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX85S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 85 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×85 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a transfer carriage where the 345 N both-way force at 0.5 MPa ensures identical push and pull momentum without requiring pressure adjustments.
Guides a vertical lifting slide using the twin rods to resist torsional twist, keeping the workpiece perfectly aligned throughout the 85mm travel.
Uses the protruding rear rod to physically trigger an external mechanical limit switch while the front rod actuates the primary tooling.
Choose this 32mm bore when an application requires exactly 483 N of force in both extend and retract directions at 0.7 MPa. If your load is lighter, stepping down is not an option as 32mm is the smallest SAID size, but stepping up to a 40mm bore increases the both-way force to 739 N. The double-rod design is selected over a single-rod SAI when you need dual-side guidance to prevent the load from rotating, or when a rear rod end is required to mount a secondary cam or position flag.
This cylinder is dimensionally interchangeable per ISO 15552, functioning as a direct replacement for other ISO 15552 double-rod cylinders. To match it to your system, specify the 32mm bore, 85mm stroke, PT port thread, and the -S magnet. Note that a plain SAID does not hold its position if air pressure is lost; use a SAIL or BSAID variant if pneumatic locking is required. The available mounting accessories are Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
Because it is a double-rod cylinder, the effective area is the same on both sides. It provides an equal extend and retract force of 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa.
Yes, it shares the ISO 15552 mounting interface, making it dimensionally interchangeable with other ISO 15552 double-rod cylinders. The compatible accessory set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.