
The AirTAC SAID32 Double Rod Cylinder SAID32BX90S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 90mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X90-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 90mm stroke. Because the piston rod exits both end covers, the annulus area is identical on both sides, yielding perfectly symmetric thrust. It generates 483N of force in both extend and retract directions at 0.7 MPa.
This variant includes a magnetic piston (-S) for position sensing and uses a SUS304 stainless steel rod (code B) for superior corrosion resistance. The rear rod extension allows you to mount a secondary cam or position flag, while the extruded aluminum barrel integrates sensor grooves on both sides for flexible switch placement.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX90S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a workpiece from one side while the opposing rod end moves an identical payload in reverse, maintaining balanced 483N force and speed throughout the cycle.
The twin-rod architecture prevents piston twisting during vertical lift applications, keeping the load guided securely without relying solely on external rails.
Uses the rear protruding rod to trigger a DMSE electronic sensor or mechanical flag, providing precise end-of-stroke confirmation in compact machinery.
Select this 32mm bore when an application requires 483N of thrust both ways and strict anti-rotation guidance. If you need less force, dropping to a smaller bore is an option, but stepping up to a 40mm bore provides 739N both ways. Choose the SAID double-rod configuration over a single-rod SAI when you need to drive twin mechanisms or require rear-rod position sensing. The built-in magnet supports AirTAC CMSE (reed) and DMSE (electronic) switches.
As a true ISO 15552 profile cylinder, it serves as a direct replacement for other ISO 15552 double-rod cylinders. It uses a PT G1/8 port and accepts mounting accessories Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, CR). Note that adjustable air cushions only decelerate the piston near stroke end; this cylinder will drift if air pressure is lost, so use a SAIL lock or external check valve if position holding is required.
Quick checklist
Because it is a double-rod cylinder, the effective piston area is identical on both sides. It provides 345N at 0.5 MPa and 483N at 0.7 MPa in both the extend and retract directions.
Yes, the SAID32X90-S shares standard ISO 15552 mounting dimensions, making it dimensionally interchangeable with other ISO 15552 double-rod profile cylinders. It uses a PT G1/8 port and a standard 32mm bore mounting interface.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.