
The AirTAC SAID32 Double Rod Cylinder SAID32BX95 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 95mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X95 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 95mm stroke. Because the piston rod extends from both end covers, the effective annulus area is identical on both sides, yielding perfectly symmetrical thrust. This design outputs 483N of force in both extend and retract directions at 0.7 MPa.
Equipped with a SUS304 stainless steel rod (option B), this variant provides superior corrosion resistance compared to standard carbon steel. It utilizes PT tapered port threads (G1/8) and includes adjustable air cushioning at both ends to decelerate the piston smoothly. The extruded aluminum barrel features dual sensor grooves, allowing for flexible mounting of CMSE reed or DMSE electronic switches if a magnet is added later.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX95 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a transfer shuttle where equal 483N push and pull forces at 0.7 MPa are critical for maintaining consistent cycle times in both directions without adjusting regulator pressure.
Powers a linear slide mechanism using the twin-rod architecture to inherently resist torsional rotation, eliminating the need for bulky external guide rails in compact spaces.
Utilizes the protruding rear rod end to mechanically trip a limit flag or actuate a secondary pneumatic valve, sequencing operations directly off the main 95mm stroke motion.
Select this 32mm bore when an application requires 483N of symmetrical force both ways at 0.7 MPa. If your mechanism needs less thrust, stepping down is not an option in the SAID range as 32mm is the smallest bore. If you need significantly more push or pull force, consider stepping up to the 40mm bore, which provides 739N in both directions. The double-rod architecture is specifically chosen over a single-rod SAI when the load requires dual-side guidance to prevent rotation, or when a rear cam and position flag must drive a secondary mechanism.
This cylinder uses a PT tapered port thread and a reduced mounting accessory set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting the FB, CA, CB, and CR brackets found on single-rod variants. Note that the adjustable air cushions only decelerate the piston near the stroke ends; they do not hold the load. If air pressure is lost, the piston will drift. For position holding without live pressure, an external pilot-operated check valve or a related locking type like SAIL or BSAID is required. At 95mm stroke, side-load bending stress on the 12mm rod bearing is minimal, but external guidance is always recommended for rigid loads.
Quick checklist
Because it is a double-rod cylinder, the effective piston area is the same on both sides. It delivers 345N at 0.5 MPa, 483N at 0.7 MPa, and 621N at 0.9 MPa in both the extend and retract directions.
Yes, it is dimensionally interchangeable per ISO 15552. However, the SAID series uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR brackets which are strictly for single-rod SAI cylinders.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.