Airtac SAID32 Double Rod Cylinder SAID32X290
The AirTAC SAID32 Double Rod Cylinder SAID32X290 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 290mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke290 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID32 Double Rod Cylinder SAID32X290
The AirTAC SAID32X290 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 290mm stroke. Because a rod exits both end covers, the annulus area is identical on extend and retract, yielding equal force and speed in both directions. It delivers 345N at 0.5 MPa and 483N at 0.7 MPa each way.
This configuration features a standard carbon steel rod and PT tapered port threads. The rear rod extension is highly useful for mounting a position flag or driving a secondary mechanism, while the twin-rod design provides superior anti-rotation guidance compared to a single-rod SAI.
Airtac SAID32 Double Rod Cylinder SAID32X290 Technical Specifications
| Model | Airtac SAID32 Double Rod Cylinder SAID32X290 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 290 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID32 Double Rod Cylinder SAID32X290
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×290 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID32 Double Rod Cylinder SAID32X290 Is Used
Symmetric Force Transfer
Transfers loads with identical push and pull force, ensuring stable, balanced motion for delicate material handling without speed fluctuations.
Anti-Rotation Slides
The twin-rod architecture prevents piston rotation, making it ideal for precision vertical lifting slides that require strict linear guidance.
Through-Rod Sensing
Mounts a cam or position flag on the rear rod end to trigger external sensors, allowing dual-side machine monitoring without extra actuator space.
Is the Airtac SAID32 Double Rod Cylinder SAID32X290 the Right Cylinder?
Choose this 32mm bore double-rod cylinder when symmetric force and dual-side guidance are required; if you need higher force, the 40mm bore offers 528N both ways at 0.5 MPa. The SAID mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR variants used on single-rod SAI models. It is dimensionally interchangeable per ISO 15552.
At 290mm stroke, the unsupported piston rod is susceptible to bending under side loads; utilize an external guide rail to prevent rod-bearing damage. Note that the adjustable air cushions at both ends only decelerate the piston near stroke end and do not hold the load if air pressure is lost.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID32 Double Rod Cylinder SAID32X290 FAQ
Because it is a double-rod cylinder, the push and pull forces are equal. It generates 345N at 0.5 MPa, 483N at 0.7 MPa, and 621N at 0.9 MPa in both directions.
Yes, the SAID32X290 is dimensionally interchangeable with other ISO 15552 profile cylinders. It supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, but omits FB, CA, CB, and CR.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAID32 Double Rod Cylinder SAID32X290
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.