Airtac SAID32 Double Rod Cylinder SAID32X55S
The AirTAC SAID32 Double Rod Cylinder SAID32X55S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 55mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke55 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID32 Double Rod Cylinder SAID32X55S
The AirTAC SAID32X55-S is a double-acting, double-rod ISO 15552 profile cylinder with a 32 mm bore and a 55 mm stroke. Because a rod exits both end covers, the annulus area is identical on extend and retract, yielding an equal 483 N of force in each direction at 0.5 MPa (and 621 N at 0.9 MPa). The extruded aluminum barrel includes sensor grooves on both sides, and the integrated -S magnet enables position tracking via CMSE reed or DMSE electronic solid-state switches.
This through-rod architecture lets you mount the primary workpiece on the front rod end and a mechanical cam, position flag, or secondary tool on the rear rod end. The standard carbon steel rod provides durable service, while the PT tapered port threads ensure a tight, leak-free pneumatic connection. As a profile cylinder, it is dimensionally interchangeable per ISO 15552 for direct replacement of other standard double-rod actuators.
Airtac SAID32 Double Rod Cylinder SAID32X55S Technical Specifications
| Model | Airtac SAID32 Double Rod Cylinder SAID32X55S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 55 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID32 Double Rod Cylinder SAID32X55S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×55 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID32 Double Rod Cylinder SAID32X55S Is Used
Symmetric Force Transfer
Drives a transfer shuttle that must push and pull identical 483 N loads at 0.5 MPa without speed variations, leveraging the equal annulus area of the twin rods.
Anti-Rotation Slides
Guides a precision vertical slide against rotational torque, using the dual-rod ends to keep the carriage perfectly aligned throughout the 55 mm stroke.
Through-Rod Sensing
Actuates a clamping mechanism on the front stroke while the rear rod end drives a physical cam past a DMSE solid-state sensor to confirm full extend position.
Is the Airtac SAID32 Double Rod Cylinder SAID32X55S the Right Cylinder?
Choose this 32 mm bore double-rod cylinder when an application demands equal push and pull forces alongside anti-rotation guidance. If you need higher force, stepping up to the 40 mm bore raises the both-way output to 528 N at 0.5 MPa. The 55 mm stroke is a non-standard made-to-order dimension; ensure your design accommodates the rear-rod protrusion, as the overall length exceeds that of a single-rod SAI cylinder. Mounting options are limited to the SAID set: Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting the FB, CA, CB, and CR variants used on single-rod models).
The -S magnet allows dual-side sensing without external physical stops. Remember that the adjustable air cushions at both ends only decelerate the piston near stroke end; they do not hold a load. If your system loses air pressure or the valve is centered, the piston will drift. For positive position holding without live pressure, consider an external rod lock, a pilot-operated check valve, or the SAIL/BSAID locking cylinder variants.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID32 Double Rod Cylinder SAID32X55S FAQ
Because the double-rod design occupies area on both sides of the piston, the extend and retract forces are equal. It outputs 483 N at 0.5 MPa, 621 N at 0.9 MPa, and a maximum of 70 kgf at 1.0 MPa in both directions.
Yes, the SAID32X55-S is an extruded aluminum profile cylinder that is dimensionally interchangeable per ISO 15552. It serves as a direct replacement for other ISO 15552 double-rod cylinders, featuring PT ports and the standard SAID mounting set.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAID32 Double Rod Cylinder SAID32X55S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.