Airtac SAID32 Double Rod Cylinder SAID32X750S
The AirTAC SAID32 Double Rod Cylinder SAID32X750S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 750mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke750 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID32 Double Rod Cylinder SAID32X750S
The AirTAC SAID32X750-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a magnet for position sensing. Because a rod exits both end covers, the annulus area is identical on extend and retract, yielding equal 345 N of force in both directions at 0.5 MPa. This through-rod geometry is ideal for mounting a primary workpiece on the front and a cam or position flag on the rear.
This 32mm bore variant features a 12mm carbon steel rod, M10x1.25 rod threading, and G1/8 ports. The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed and DMSE electronic switches. Adjustable air cushions at both ends (27 mm cushion length) safely decelerate the piston, though an external guide is recommended for this extended 750 mm stroke to prevent rod-bearing bending.
Airtac SAID32 Double Rod Cylinder SAID32X750S Technical Specifications
| Model | Airtac SAID32 Double Rod Cylinder SAID32X750S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 750 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID32 Double Rod Cylinder SAID32X750S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×750 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID32 Double Rod Cylinder SAID32X750S Is Used
Symmetric Force Transfer
Delivers equal push and pull forces for transferring parts between two workstations without needing to reconfigure pressure settings for direction changes.
Anti-Rotation Slides
The twin-rod design keeps the guided load perfectly aligned and prevents rotational drift during vertical or horizontal clamping operations.
Rear-Sensed Tooling
Mounts the primary actuation tool on the front rod while using the rear rod extension to trigger a DMSE solid-state sensor for precise end-of-stroke confirmation.
Is the Airtac SAID32 Double Rod Cylinder SAID32X750S the Right Cylinder?
Choose this double-rod configuration when your mechanism requires dual-side guidance, anti-rotation stability, or rear-rod sensing that a single-rod SAI cannot provide. If your application demands higher thrust, stepping up to the 40mm bore yields 528 N each way at 0.5 MPa. Conversely, if you need less force, the 32mm bore is the smallest standard option in this series.
For direct replacements, verify the bore, 750mm stroke, PT port thread, and mounting accessory. SAID supports a reduced ISO 15552 mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). Note that the adjustable cushions only decelerate the piston; they do not hold a load. If air pressure is lost, the cylinder drifts, so use a SAIL lock cylinder or external rod lock for position holding. Given the 750mm stroke, always support the load externally to manage side-load and rod deflection.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID32 Double Rod Cylinder SAID32X750S FAQ
It provides 345 N of force in both extend and retract directions at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa. The double-rod design ensures push and pull forces are equal.
Yes, the SAID32X750-S is dimensionally interchangeable per ISO 15552. Just confirm your mounting style is compatible with the SAID set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and that you have adequate rear-rod clearance.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAID32 Double Rod Cylinder SAID32X750S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.