The AirTAC SC32 Standard Cylinder SC32X10 is a genuine double-acting standard air cylinder with a Ø32mm bore and 10mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC32X10 is a compact double-acting tie-rod cylinder delivering 402 N of push force at 0.5 MPa (724 N at the 0.9 MPa maximum operating pressure). Its 10 mm stroke suits precise short-travel positioning, ejector, and clamping tasks where space is limited.
This 32 mm bore model uses a 12 mm diameter piston rod with M10x1.25 male threads and PT1/8 ports. The body length A is 140 mm, giving a total extended length of approximately 150 mm. Adjustable air cushioning (21 mm cushion length) decelerates the piston quietly at end of stroke.
| Model | Airtac SC32 Standard Cylinder SC32X10 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 10 mm stroke provides fast, repeatable clamping force for small workpieces in CNC fixtures and assembly jigs.
Delivers a quick, sharp push to eject lightweight parts from conveyors or sorting chutes in automated packaging lines.
Ideal for light pressing or staking operations where a short, controlled linear motion and 402 N force are sufficient.
For applications needing slightly more force, the SC40 bore steps up to 628 N push at 0.5 MPa. When replacing an existing cylinder, match all five key points: 32 mm bore, 10 mm stroke, PT1/8 port thread, the required mounting accessory, and the presence or absence of a magnet (-S suffix).
At this short 10 mm stroke, side-load bending on the 12 mm rod is minimal, but always align the load axially to maximise seal life.
Quick checklist
At 0.5 MPa the push force is 402 N and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 724 N.
No. The AirTAC SC series is a tie-rod cylinder with a shorter body length than an ISO 15552 cylinder, so it is not dimensionally interchangeable. Replace only with another AirTAC SC32 tie-rod cylinder matching the same stroke, port, and mounting.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.