The AirTAC Airtac SC32 Standard Cylinder SC32X1000 is a genuine double-acting standard air cylinder with a Ø32mm bore and 1000mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC32X1000 single-rod double-acting cylinder provides a 1000 mm stroke from a compact 32 mm bore body. At 0.5 MPa air pressure it generates 402 N pushing force and 345 N pulling force, suiting light automation tasks that need long travel.
This tie-rod design uses a 12 mm diameter piston rod with M10x1.25 threads and PT1/8 ports. The 21 mm adjustable air cushion at each end decelerates the load smoothly. With a body length A of 140 mm, the total extended length reaches 1140 mm.
| Model | Airtac SC32 Standard Cylinder SC32X1000 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 1000 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Moves lightweight components across a 1000 mm span on packaging or assembly lines where a compact 32 mm bore body fits narrow machine frames.
Pushes finished parts off a conveyor or out of a nest with 402 N of force at standard shop air pressure, ideal for plastic or small metal items.
Drives a long-travel linear slide in test or sampling equipment, using filtered air and adjustable cushioning for smooth, repeatable motion.
For higher force at similar stroke, step up to the 40 mm bore SC40 series which delivers 628 N push at 0.5 MPa. At 1000 mm stroke, the 12 mm rod is slender; avoid side loading or use an external linear guide to prevent rod bending and premature bearing wear.
To match this cylinder exactly for replacement, confirm five points: 32 mm bore, 1000 mm stroke, PT1/8 port thread, basic mounting (no accessory brackets), and no built-in magnet.
Quick checklist
At 0.5 MPa the cylinder pushes with 402 N and pulls with 345 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 724 N. The theoretical maximum at 1.0 MPa is 82 kgf.
This model does not include a built-in magnet. To use CMSG/DMSG/EMSG sensors for position detection, order the SC32X1000-S variant which has a magnetized piston.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.