The AirTAC Airtac SC32 Standard Cylinder SC32X1000S is a genuine double-acting standard air cylinder with a Ø32mm bore and 1000mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC32X1000S is a double-acting single-rod pneumatic cylinder with a 32 mm bore and a full 1000 mm stroke—the maximum standard stroke for this bore size. It delivers 402 N of push force at 0.5 MPa, rising to 724 N at the maximum operating pressure of 0.9 MPa, driven by a 12 mm diameter piston rod with M10x1.25 knuckle threads.
The built-in magnet (denoted by the -S suffix) allows direct mounting of CMSG, DMSG, or EMSG reed and solid-state sensors along the tie-rod barrel for reliable end-of-stroke or mid-stroke position feedback. PT1/8 ports, adjustable air cushioning, and a compact body length of 140 mm (plus stroke) make it a practical long-reach actuator for light automation tasks.
| Model | Airtac SC32 Standard Cylinder SC32X1000S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 1000 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 1000 mm stroke moves light components across wide conveyor gaps or between parallel lines, with sensor feedback confirming full extension and retraction.
Directs small packages or products down different chutes. The built-in magnet enables precise gate-position sensing without external flags.
Extends a sampling probe into a process stream. The clean, filtered-air operation and adjustable cushion protect delicate glassware or sensors at the stroke end.
Choose the SC32 bore when your application needs up to 402 N at 0.5 MPa. If you require more force, step up to the SC40 bore which provides 628 N at the same pressure. For strokes of 300 mm or longer, always assess side-loading: a 12 mm rod extended to 1000 mm is susceptible to bending under lateral force—consider pairing this cylinder with an external linear guide or switching to a guided cylinder assembly. When replacing an existing unit, match five points: 32 mm bore, 1000 mm stroke, PT1/8 port thread, the built-in magnet (-S), and your current mounting accessory (this is a basic body, order FA, FB, CA, CB, LB, or TC mounts separately).
Quick checklist
At 0.7 MPa (7 bar) the push force is 563 N, and the pull force is 483 N. The maximum push force at the 0.9 MPa operating limit is 724 N. These values are based on the 32 mm bore and 12 mm rod diameter.
Yes. The -S suffix means a magnet is built into the piston, so you can clamp CMSG (reed) or DMSG/EMSG (solid-state) sensors directly onto the cylinder's tie-rod barrel to detect piston position.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.