The AirTAC Airtac SC32 Standard Cylinder SC32X1000SFB is a genuine double-acting standard air cylinder with a Ø32mm bore and 1000mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X1000SFB is a double-acting tie-rod cylinder delivering 402 N of push force at 0.5 MPa (724 N at the 0.9 MPa maximum operating pressure). With its 32 mm bore and 12 mm piston rod, it is built for light clamping, sorting, and ejection tasks where a full 1000 mm stroke is needed.
This model is factory-configured with a built-in magnet (-S) for mounting CMSG/DMSG/EMSG sensors directly on the barrel, and a rear rectangular flange (FB, part F-SC32FB) for rigid end-face mounting. The standard PT1/8 ports and M10x1.25 rod thread keep integration simple, while the 21 mm adjustable air cushion protects the end caps at high cycle rates.
| Model | Airtac SC32 Standard Cylinder SC32X1000SFB |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 1000 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 1000 mm stroke pushes lightweight parts across a wide conveyor for sorting or rejection, with the FB flange providing a stable fixed mounting point at the cap end.
Extends a dispensing nozzle along a 1-meter glue line. The built-in magnet allows mid-stroke position confirmation via reed sensors to control bead start and stop.
Mounted via the rear flange on a packaging line to push cartons off a roller bed. The adjustable cushion absorbs impact energy at the end of the long 1000 mm travel.
Choose the SC32 for light-duty applications needing up to 724 N of thrust. If your load requires more force, step up to the SC40 bore, which provides 628 N at 0.5 MPa. For this 1000 mm stroke, which is the maximum standard stroke for the 32 mm bore, ensure the load is guided externally—the 12 mm rod is slender and will bend under side load or buckling forces if not supported. When replacing an existing cylinder, match five points: 32 mm bore, 1000 mm stroke, PT1/8 port thread, the rear flange FB mounting, and the built-in magnet for sensor compatibility.
Quick checklist
At the standard 0.5 MPa operating pressure, the push force is 402 N and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 724 N. The theoretical maximum force at 1.0 MPa is 82 kgf.
No. For a 1000 mm stroke with a 12 mm diameter rod, side loading or high-speed operation can cause the rod to buckle or bend. You must use an external guide rail or rod support to absorb transverse forces and prevent premature seal and bearing wear.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.