The AirTAC Airtac SC32 Standard Cylinder SC32X1000SH is a genuine double-acting standard air cylinder with a Ø32mm bore and 1000mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X1000SH is a double-acting pneumatic cylinder reaching the maximum standard stroke for the 32 mm bore class. With a 12 mm piston rod and 21 mm adjustable air cushion at each end, it decelerates loads smoothly even at the full 1000 mm travel. The built-in magnet (suffix S) allows CMSG/DMSG/EMSG sensors to clamp directly onto the tie-rod barrel for non-contact position sensing.
Rated for 0.15–1.0 MPa, this unit pushes with 402 N at 0.5 MPa and reaches 724 N at 0.9 MPa. The H suffix specifies Viton (FKM) seals, shifting the operating temperature range to 0–150 °C—ideal for hot environments where standard TPU would degrade. Ports are PT1/8 and the rod thread is M10x1.25. Body length A is 140 mm, giving an extended length of approximately 1140 mm.
| Model | Airtac SC32 Standard Cylinder SC32X1000SH |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 1000 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Viton seals withstand 0–150 °C, making this cylinder suitable for autoclave doors, drying ovens, or foundry equipment where heat degrades standard seals.
1000 mm travel with magnetic piston sensing enables precise, multi-position diverting of small packages on conveyor lines, confirmed by CMSG sensors.
The 32 mm bore provides light, consistent force for dancer-roll tensioning over a long stroke, with the adjustable cushion protecting delicate yarns at end-of-travel.
Choose the SC32 bore when your application needs up to 402 N at 0.5 MPa and space is tight. If you require more force, step up to the SC40 (628 N at 0.5 MPa). At 1000 mm stroke, the slender 12 mm rod is susceptible to bending under side loads—fit an external guide rail or consider a guided cylinder if the load is not perfectly axial. For a drop-in replacement, match bore (32 mm), stroke (1000 mm), PT1/8 ports, the -S magnet option, and the Viton seal material.
Quick checklist
At 0.7 MPa supply pressure, the theoretical pushing force is 563 N. The maximum force at the rated 0.9 MPa operating pressure is 724 N.
No. The SC series is a tie-rod cylinder and is dimensionally shorter than an ISO 15552 profile cylinder. It is not interchangeable with ISO 15552 mounts or dimensions. Replace only with another AirTAC SC32 tie-rod cylinder matching the 1000 mm stroke, PT ports, magnet option, and Viton seals.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.