The AirTAC Airtac SC32 Standard Cylinder SC32X100TC is a genuine double-acting standard air cylinder with a Ø32mm bore and 100mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X100TC is a double-acting pneumatic cylinder delivering 402 N of push force at 0.5 MPa, ideal for compact automation requiring a pivoting motion. This model features a 12 mm piston rod and an M10x1.25 rod thread, with a total extended body length of 240 mm.
Supplied with the TCM1 trunnion bracket (part code F-SC32TC), the centre trunnion mount allows the cylinder to swing through an arc, absorbing misalignment in pivoting applications. The adjustable air cushion at each end decelerates the piston smoothly, protecting end caps from impact at speeds up to 800 mm/s.
| Model | Airtac SC32 Standard Cylinder SC32X100TC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 100 mm stroke and pivoting trunnion mount make this cylinder ideal for actuating diverter gates on compact conveyor systems, handling light products with its 402 N push force.
Used to swing a clamping arm into position on a small assembly jig. The centre trunnion allows the entire cylinder body to pivot, providing clean, repeatable clamping motion.
A reliable choice for laboratory test fixtures requiring a short, precise linear stroke with a swinging mount to accommodate the device under test.
For higher force requirements, consider stepping up to the SC40 bore, which provides 628 N of push force at the same 0.5 MPa pressure. The SC32X100TC is a tie-rod cylinder and is not dimensionally interchangeable with ISO 15552 profile cylinders; it is a direct replacement only for another AirTAC SC32 tie-rod cylinder matching the 100 mm stroke, PT1/8 port, and centre trunnion mount.
Quick checklist
At the standard operating pressure of 0.5 MPa, the push force is 402 N and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 724 N.
No. The AirTAC SC series is a tie-rod cylinder and is shorter than an equivalent ISO 15552 cylinder. It is not dimensionally interchangeable. To replace it, you must match another SC32 cylinder with a 100 mm stroke, PT1/8 ports, and a TC centre trunnion mount.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.