The AirTAC Airtac SC32 Standard Cylinder SC32X105 is a genuine double-acting standard air cylinder with a Ø32mm bore and 105mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC32X105 is a compact double-acting tie-rod cylinder delivering 402 N of push force at 0.5 MPa (563 N at 0.7 MPa). Its 12 mm piston rod and 21 mm adjustable air cushion make it a precise choice for light automation tasks requiring a 105 mm stroke.
With a body length of just 140 mm plus the 105 mm stroke, this SC32X105 fits into tight machine envelopes. The PT1/8 ports and M10x1.25 rod thread are standard across the SC32 family, and the cylinder operates reliably on filtered air from -20 to +70 °C with its default TPU seals.
| Model | Airtac SC32 Standard Cylinder SC32X105 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 105 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×105 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 402 N push force at 0.5 MPa is ideal for light-duty clamping fixtures in electronics or medical device assembly, where a 105 mm stroke provides ample reach.
Use the SC32X105 to operate small diverter gates on packaging conveyors. The adjustable cushion reduces end-of-stroke impact, extending seal life in high-cycle sorting applications.
The 32 mm bore and 105 mm stroke suit label press mechanisms. The tie-rod design allows easy maintenance, and the PT1/8 port fits standard pneumatic plumbing.
Choose the SC32X105 when your application needs a compact 32 mm bore with moderate push force. If you require more thrust, step up to the SC40 series which provides 628 N at 0.5 MPa. For strokes above 300 mm on this bore, consider an external guide to protect the 12 mm rod from side-load bending.
To replace an existing cylinder, match five points: 32 mm bore, 105 mm stroke, PT1/8 port thread, basic (no bracket) mounting, and no magnet. This ensures a direct dimensional and performance swap for another AirTAC SC32 tie-rod unit.
Quick checklist
At 0.5 MPa, the SC32X105 generates 402 N pushing and 345 N pulling. At 0.7 MPa, push force increases to 563 N. The maximum operating force at 0.9 MPa is 724 N.
No. The AirTAC SC series is a tie-rod cylinder and is shorter than an ISO 15552 cylinder, so it is not dimensionally interchangeable. Only replace another AirTAC SC32 tie-rod cylinder with the same bore, stroke, port, and mounting.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.