verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SC Series · Standard Cylinder

Airtac SC32 Standard Cylinder SC32X1050SH

The AirTAC SC32 Standard Cylinder SC32X1050SH is a genuine double-acting standard air cylinder with a Ø32mm bore and 1050mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.

  • BoreØ32 mm
  • Stroke1050 mm
  • Port sizePT1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 21 mm
$99.07 $106.57Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SC32 stroke, mounting and version on one page All SC32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SC32 Standard Cylinder SC32X1050SH

The AirTAC SC32X1050SH is a double-acting tie-rod cylinder with a 32 mm bore and a non-standard 1050 mm stroke, built for high-temperature applications with its Viton (FKM) seal package. It delivers a push force of 402 N at 0.5 MPa and up to 724 N at the maximum operating pressure of 0.9 MPa, driven by a 12 mm diameter piston rod.

This model features a built-in magnet (-S suffix) for direct mounting of CMSG/DMSG/EMSG sensors, enabling precise end-of-stroke detection without external brackets. The -H suffix upgrades the seals to Viton, shifting the operating temperature range to 0 to +150 °C, making it suitable for hot environments like drying ovens or engine bays. With a body length of 140 mm, its total extended length is approximately 1190 mm.

Airtac SC32 Standard Cylinder SC32X1050SH Technical Specifications

ModelAirtac SC32 Standard Cylinder SC32X1050SH
SeriesSC standard tie-rod cylinder
Bore sizeØ32 mm
Stroke1050 mm
Acting typeDouble acting
Port sizePT1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 21 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa402 N346 N
0.7 MPa563 N—
Max (approx.)82 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SC32 Standard Cylinder SC32X1050SH

SCStandard tie-rod cylinder series.
32Bore size in mm.
×1050Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.

Where the Airtac SC32 Standard Cylinder SC32X1050SH Is Used

biotech

Hot-Zone Material Handling

Operates reliably in autoclave unloading or drying oven actuators where ambient temperatures reach up to 150°C, using the Viton seals to maintain consistent double-acting motion.

precision_manufacturing

Long-Reach Part Ejection

The 1050 mm stroke, guided by an external rail, pushes lightweight parts off a high-temperature forming press, with the built-in magnet confirming full extension and retraction.

engineering

Engine Compartment Test Rig

Simulates repetitive mechanical motion inside hot engine test cells, leveraging the SC32X1050SH's heat-resistant seals and sensor-ready barrel for cycle counting.

Is the Airtac SC32 Standard Cylinder SC32X1050SH the Right Cylinder?

Select the SC32X1050SH when you need a compact 32 mm bore cylinder with a long, non-standard stroke and high-temperature resilience. If your force requirement exceeds the 724 N push at 0.9 MPa, step up to the SC40 bore, which provides 1130 N at the same pressure. For strokes this long, the slender 12 mm rod is susceptible to bending under side loads; always use an external linear guide or ensure the load is purely axial to prevent rod bearing damage and seal wear.

For a direct replacement, match five key specifications: the 32 mm bore, the 1050 mm stroke, the PT (1/8) port thread, the built-in magnet for sensor compatibility, and the Viton seal material for high-temperature operation. This tie-rod cylinder is shorter than an ISO 15552 profile and is not dimensionally interchangeable with that standard.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SC32 Standard Cylinder SC32X1050SH FAQ

At the maximum operating pressure of 0.9 MPa, the cylinder produces a push force of 724 N. At the standard 0.5 MPa pressure, the push force is 402 N.

No. The SC32X1050SH is a double-acting cylinder and will not hold its position if air pressure is lost or the directional valve is centered. The piston will drift. You must add an external rod brake, a mechanical lock, or a pilot-operated check valve to hold a load safely.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SC Cylinders

Request a Quote for Airtac SC32 Standard Cylinder SC32X1050SH

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SC32X1050SH and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.